INCH-POUND
MILITARY SPECIFICATION
MIL-L-87177A
9 February 1990
SUPERSEDING MIL-L-87177
9 September 1983
1. SCOPE
LUBRICANTS, WATER DISPLACING, SYNTHETIC
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1.1 Scope. This specification covers synthetic, water displacing lubricant, compounds which may be applied from gas pressurized containers, or by dipping or brushing.
1.2 Classification. The compound shall be furnished in the specified types and grades (see
6.2).
1.2.1 Types. The compound types shall consist of the following:
a. Type I: Pressurized spray container (for spray application). b. Type II: Bulk form.
1.2.2 Grades. The compound grades shall be designated as follows:
a. Grade A: Lubricant, water displacing, synthetic.
b. Grade B: Lubricant, water displacing, synthetic, with added corrosion inhibitor.
c. Grade C: Lubricant, dry spray, synthetic.
2.1 Government documents
2.1.1 Specifications and standards. The following specifications and standards form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2)
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: ASD/ENES, Wright-Patterson AFB OH 45433-6503 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A FSC 9150
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business