MIL-DTL-85694A
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of
this specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort
has been made to ensure the completeness of this list, document users are cautioned that they
must meet all specified requirements cited in sections 3 and 4 of this specification, whether or
not they are listed.
2.2 Non-Government publications. The following documents form a part of this document to
the extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract.
ASTM INTERNATIONAL
ASTM D92
-
Standard Test Method for Flash and Fire Points by Cleveland Open Cup
Tester
ASTM D97
-
Standard Test Method for Pour Point of Petroleum Products
ASTM D445
-
Standard Test Method for Kinematic Viscosity of Transparent and Opaque
Liquids (and Calculation of Dynamic Viscosity)
ASTM D2270 -
Standard Practice for Calculating Viscosity Index from Kinematic
Viscosity at 40 and 100º C
ASTM D2273 -
Standard Test Method for Trace Sediment in Lubricating Oils
ASTM D4052 -
Standard Test Method for Density, Relative Density, and API Gravity of
Liquids by Digital Density Meter
ASTM D4057 -
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D4177 -
Standard Practice for Automatic Sampling of Petroleum and Petroleum
Products
ASTM D5185 -
Standard Test Method for Determination of Additive Elements, Wear Metals,
and Contaminants in Used Lubricating Oils and Determination of Selected
Elements in Base Oils by Inductively Coupled Plasma Atomic Emission
Spectrometry
ASTM D6595
-
Standard Test Method for Determination of Wear Metals and Contaminants in
Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode
Atomic Emission Spectrometry
(Copies of these documents are available online at www.astm.org or from ASTM International,
100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959.)
AMERICAN SOCIETY FOR QUALITY (ASQ)
ASQ-Z1.4 - Sampling Procedures and Tables for Inspection by Attributes.
(Copies of this document are available online at www.asq.org or from the American Society for
Quality, P.O. Box 3005, 611 East Wisconsin Avenue, Milwaukee, WI 53201-4606.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business