MIL-PRF-9000J(SH)
ASTM D2622
-
Standard Test Method for Sulfur in Petroleum Products by Wavelength
Dispersive X-Ray Fluorescence Spectrometry (DoD adopted)
ASTM D2896
-
Standard Test Method for Base Number of Petroleum Products by
Potentiometric Perchloric Acid Titration (DoD adopted)
ASTM D3228
-
Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel
Oils by Modified Kjeldahl Method (DoD adopted)
ASTM D4047
-
Standard Test Method for Phosphorus in Lubricating Oils and
Additives by Quinoline Phosphomolybdate Method (DoD adopted)
ASTM D4052
-
Standard Test Method for Density and Relative Density of Liquids by
Digital Density Meter (DoD adopted)
ASTM D4057
-
Standard Practice for Manual Sampling of Petroleum and Petroleum
Products (DoD adopted)
ASTM D4485
-
Standard Specification for Performance of Engine Oils
ASTM D4628
-
Standard Test Method for Analysis of Barium, Calcium, Magnesium,
and Zinc in Unused Lubricating Oil by Atomic Absorption
Spectrometry (DoD adopted)
ASTM D4629
-
Standard Test Method for Trace Nitrogen in Liquid Petroleum
Hydrocarbons by Syringe/Inlet Oxidative Combustion and
Chemiluminescence Detection (DoD adopted)
ASTM D4683
-
Standard Test Method for Measuring Viscosity of New and Used Engine
Oils at High Shear Rate and High Temperature by Tapered Bearing
Simulator Viscometer at 150 °C
ASTM D4684
-
Standard Test Method for Determination of Yield Stress and Apparent
Viscosity of Engine Oils at Low Temperature (DoD adopted)
ASTM D4927
-
Standard Test Methods for Elemental Analysis of Lubricant and
Additive Components - Barium, Calcium, Phosphorus, Sulfur, and Zinc
by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy (DoD
adopted)
ASTM D4951
-
Standard Test Method for Determination of Additive Elements in
Lubricating Oils by Inductively Coupled Plasma Atomic Emission
Spectrometry (DoD adopted)
ASTM D5182
-
Standard Test Method for Evaluating the Scuffing Load Capacity of
Oils (FZG Visual Method)
ASTM D5293
-
Standard Test Method for Apparent Viscosity of Engine Oils Between -5
and -35 °C Using the Cold-Cranking Simulator
ASTM D5762
-
Standard Test Method for Nitrogen in Petroleum and Petroleum
Products by Boat-Inlet Chemiluminescence
ASTM D5949
-
Standard Test Method for Pour Point of Petroleum Products (Automatic
Pressure Pulsing Method)
ASTM D5950
-
Standard Test Method for Pour Point of Petroleum Products (Automatic
Tilt Method)
ASTM D6278
-
Standard Test Method for Shear Stability of Polymer Containing Fluids
Using a European Diesel Injector Apparatus
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business