MIL-PRF-6085E
5.
PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in
the contract or order (see 6.2). When actual packaging of materiel is to be performed by DoD or in-house
contractor personnel, these personnel need to contact the responsible packaging activity to ascertain
packaging requirements. Packaging requirements are maintained by the Inventory Control Point's
packaging activities within the Military Service or Defense Agency, or within the military service's system
commands. Packaging data retrieval is available from the managing Military Department's or Defense
Agency's automated packaging files, CD-ROM products, or by contacting the responsible packaging
activity.
6.
NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not
mandatory.)
Intended use. This oil is intended for use in military aircraft instruments, electronic
6.1
equipment or where low evaporation oil is required for both high and low temperature application, and
where oxidation and corrosion resistance is desirable.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a. Title, number and date of this specification.
b. If required, the specific issue of the individual documents referenced (see 2.1 and 2.2).
c. Type and size of containers (see 5.1).
d. Quantity.
e. Selection of applicable levels of packaging and packing with requirements in detail (see 5.1).
Purchase unit. The instrument oil covered by this specification should be purchased by
6.2.1
volume.
6.3 Qualification. With respect to products requiring qualification, awards will be made only for
such products as have, prior to the time set for opening of bids, been tested and approved for inclusion in
the applicable QPL whether or not such products have actually been so listed by that date. The attention
of the suppliers is called to this requirement and manufacturers are urged to arrange to have the products
they propose to offer to the Federal Government tested for qualification, in order that they may be eligible
to be awarded contracts or orders for the products covered by this specification. The activity responsible
for the QPL is AFPA/PTPT, 2430 C Street, Bldg 70, Area B, Wright-Patterson AFB OH 45433.
Information pertaining to qualification of products may be obtained from that activity.
6.3.1 Qualification information. It is understood that the material furnished under this
specification subsequent to final approval will be of the same composition and will be equal to products
upon which approval was originally granted. In the event that the oil furnished under contract is found to
deviate from the composition of the approval product, or that the product fails to perform satisfactorily,
approval of such products will be subjected to immediate withdrawal from the QPL at the discretion of the
approving activity.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business