MIL-PRF-6085E
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers one grade of aircraft instrument lubricating oil only (see
6.1). The lubricating oil is identified by military symbol OAI and NATO Code No. 0-147 (see 6.5).
1.2 Part or identifying number (PIN). The PIN to be used for lubricating oil acquired to this
specification is created as follows:
M6085
-
X
Container Size
1 = 1.5 oz.
2 = 4 oz.
3 = 8 oz.
4 = 1 quart
5 = 5 gallon
2
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
QQ-S-698
Steel, Sheet and Strip, Low Carbon
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-680
Degreasing Solvent
(Copies of these documents are available online at https://assist.daps.dla.mil or from the Standardization
Document Order Desk, 700 Robbins Avenue, Bldg 4D, Philadelphia PA 19111-5094.)
2.3 Non-government publications. The following documents form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
ASTM INTERNATIONAL
ASTM A29/A29M
Standard Specification for Steel Bars, Carbon and Alloy, Hot-
Wrought, General Requirements for (DoD Adopted)
ASTM B36/B36M
Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
(DoD Adopted)
ASTM D91
Standard Test Method for Precipitation Number of Lubricating Oils
(DoD Adopted)
ASTM D92
Standard Test Method for Flash and Fire Points by Cleveland Open
Cup Tester (DoD Adopted)
ASTM D97
Standard Test Method for Pour Point of Petroleum Products
(DoD Adopted)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business