MIL-PRF-6085E
c.
Conformance inspection (see 4.3).
4.2 Qualification inspection. Qualification inspection shall consist of a review for approval of the
submitted manufacturers test report and subjecting the qualification samples (see 4.2.1) to examination
and testing for all the requirements of this specification.
4.2.1 Qualification samples. The qualification sample(s) shall consist of 1 gallon finished oil.
4.2.2 Qualification tests. Qualification sample(s) shall be subjected to all tests specified in 4.4,
method of inspection.
4.2.3 Retention of qualification. In order to retain qualification of a product approved for listing
on the QPL, the manufacturer shall verify by certification to the qualifying activity that the manufacturer's
product complies with the requirements of this specification. The time of periodic verification by
certification shall be in five-year intervals from the date of original qualification. The Government reserves
the right to re-examine the qualified product whenever deemed necessary to determine that the product
continues to meet any or all of the specification requirements.
4.2.4 Periodic qualification re-evaluation. The instrument oil shall pass a qualification re-
evaluation of a one gallon sample taken from the first lot of oil processed under a contract or order after
the product has passed the qualification inspection, and at intervals as considered necessary to verify the
consistency of production quality.
4.3 Conformance inspection. The conformance samples shall be labeled completely with
information identifying the purposes of the sample, name of product, specification number, lot and batch
number (packaged or bulk - see 6.7), date of sampling, and contract number. Quality conformance tests
shall be as specified in table II.
4.3.1 Sampling. Sampling shall be in accordance with ASTM D4057.
TABLE II. Quality conformance tests.
Inspection
Test
Paragraph
Requirement
4.4.2
3.4.1, 3.4.2
Corrosion and oxidation stability
4.4.2
3.4.3
Low temperature stability
4.4.2
3.3
Viscosity
4.4.2
3.3
Pour point
4.4.2
3.3
Flash point
4.4.2
3.3
Precipitation number
4.4.2
3.4.4
Evaporation
4.4.3
5.1
Examination of filled containers
4.4.2
3.5
Color
4.4 Method of inspection
4.4.1 Inspection. Inspection shall be in accordance with 4.4.3 of this specification.
4.4.2 Physiochemical values. The oil properties shall be determined in accordance with the
applicable methods specified in table III and 4.4.1 through 4.4.3. Physical and chemical values specified
in section 3 apply to the arithmetic average of the determinations made on the samples for those values
that fall within any stated repeatability or reproducibility limits of the applicable test method.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business