No. Defect
VV-G-671G
101. Unit Containers not of the size (s) specified.
102. Unit containers not as specified in MIL-STD-290.
103. Intermediate containers, when required, not as specified in MIL-STD-290.
104. Quantity and arrangement of unit containers positioned within intermediate containers, when required, not as specified in MIL-STD-290.
105. Quantity and arrangement of filled intermediate containers packed within exterior containers, when required, not as specified in MIL-STD-290.
106. Exterior containers, when required, not as specified in MIL-STD-290.
107. Marking not as specified herein and in MIL-STD-290.
4.7 Toxicological formulations. The contractor shall have the toxicological formulations and associated information available for review by the contracting activity to evaluate the safety of the material for proposed use.
5. PACKAGING
5.1 Packaging and packing. For acquisition purposes, the packaging requirements shall be as specified in the contract or order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are maintained by the Inventory Control Point's packaging activities within the Military Service or Defense Agency, or within the military service's system commands. Packaging data retrieval is available from the managing Military Department's or Defense Agency's automated packaging files, CD- ROM products, or by contacting the responsible packaging activity.
5.2 Marking. In addition to any special or identification markings required by the contract or purchase/delivery order, all containers shall be marked in accordance with
MIL-STD-129 and MIL-STD-290.
5.3 Palletization. When specified (see 6.2), the packed grease shall be palletized in accordance with MIL-STD-147. Palletized load shall be marked in accordance with
MIL-STD-290.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. This graphite grease is intended for use in equipment or machinery equipped with compression-type grease cups when lubrication instructions or orders specify a National Lubricating Grease Institute (NLGI) No. 2 graphite grease. The use of this grease should be limited to equipment intended for operation in the temperature range from -23 to 60
°C. Use of this grease at temperatures below -23 °C or above 60 °C may not provide acceptable performance in equipment or machinery systems.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business