VV-G-632 Grease, Industrial, General Purpose S/S By Mil-Prf-10924This specification covers one grade of a lubricating grease intended primarily for the lubrication of machinery which is equipped with compression type grease cups see 6.8.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9

VV-G-632B

(Non-Government, standards and other publications are normally available from the organizations that prepare or distribute the documents.  These documents also may be available in or through libraries or other informational services.)

3.  REQUIREMENTS

3.1  Material Safety Data Sheets (MSDS).  The contractor shall certify that no carcinogenic or potentially carcinogenic constituents are present as defined under the Hazard Communication Standard (HCS) (29 CPR 1910.1200). Certification to this effect shall be made available to the contracting officer or the contracting officer's designated representative.  When awarded a contract, the manufacturer submit to the contracting officer or designated representative manufacturer submit to the contracting officer or designated representative Material Safety Data Sheets prepared in accordance with FED-STD-313 and

CFR 1910.1200. When FED-STD-313 is at variance with the CFR, 29 CFR 1910.1200 shall take precedence, modify and supplement FED-STD-313.

3.2  Materials.  The grease shall consist of a mineral lubricating oil thickened with a calcium soap of one or more of the higher fatty acids with or without additives as necessary to meet the requirements of this specification. The mineral lubricating oil may be either virgin oil, re-refined oil, or a mixture thereof.

3.2.1  Toxic products and formulations.  The grease shall have no adverse effect on the health of personnel when used for its intended purpose.  The grease shall contain no components which produce noxious vapors in such concentrations as to be an annoyance to personnel during formulation or normal use under conditions of adequate ventilation while exercising caution to avoid prolonged contact with the skin and while observing occupational Safety and Health Administration (OSHA) guidelines.  Questions pertinent to this effect shall be referred by the contracting activity to the contracting agency.

3.3  Chemical and physical requirements.

3.3.1  Requirements for the base stock.  The base stock shall consist of mineral oil conforming to the requirements specified in table I.

TABLE I.  Requirements for the mineral oil base.

3.3.2  Requirements for the finished grease.  The finished grease shall conform the requirements specified in table II.

3