MIL-PRF-85336B
ASTM-D971
-
Interfacial Tension of Oil Against Water by the Ring Method,
Standard Test Method for. (DoD adopted)
ASTM-D972
-
Evaporation Loss of Lubricating Greases and Oils, Standard
Test Method for. (DoD adopted)
ASTM-D2266
-
Wear Preventive characteristics of Lubricating Grease, (Four-
Ball Method), Standard Test Method for. (DoD adopted)
ASTM-D2625
-
Endurance (Wear) Life and Load-Carrying Capacity of Solid
Film Lubricants (Falex Pin and Vee Method), Standard Test
Method for. (DoD adopted)
ASTM-D2670
-
Measuring Wear Properties of Fluid Lubricants (Falex Pin and
Vee Method), Standard Test Method for. (DoD adopted)
ASTM-D4057
-
Manual Sampling of Petroleum and Petroleum Products,
Standard Practice for. (DoD adopted)
ASTM-D4177
-
Automatic Sampling of Petroleum and Petroleum Products,
Standard Practice for. (DoD adopted)
(Application for copies should be addressed to the American Society for Testing and
Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
2.4 Order of precedence. In the event of a conflict between the text 0of this document and
the references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1. Qualification. The lubricant furnished under this specification shall be a product that is
authorized by the qualifying activity for listing on the applicable qualified product list before
contract award (see 4.2 and 6.3).
3.2 Composition. The semi-fluid lubricant shall consist of a mixture of esters and silicone
fluids thickened with a thickening agent (see 6.5), and shall conform to all of the requirements of
this specification (see 6.6).
3.3 Material.
3.3.1 Thickener purity. The thickener infusion surface tension shall be not less than
38 x 10-3 N/m when tested in accordance with 4.5.3.
3.4 Physical properties. The physical properties of the finished lubricant shall in accordance
with table I.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business