MIL-PRF-85336B
Department's System Command. Packaging data retrieval is available from the managing Military
Department's or Defense Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature which may be helpful,
but is not mandatory.)
6.1 Intended use. The lubricant covered by this specification is intended primarily for use on
20-mm rotary guns such as the M61A1 and M197. The lubricant is used on all parts of the
system with the exception of the prelubricated sealed bearings and the recoil spring assemblies.
This lubricant reduces corrosion due to exposure to the marine environment, permits high firing
rates at low temperatures, and permits operations under icing conditions.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of the specification.
b. Issue of DoDISS to be cited in the solicitation, and if required, the specific issue of
individual documents referenced (see 2.2.1 and 2.3).
c. Packaging requirements (see 5.1).
d. Material safety data sheet (see 6.4).
6.3 Qualification. With respect to products requiring qualification, awards will be made only
for products which are, at the time of award of contract, qualified for inclusion in Qualified
Products List QPL-85336, whether or not such products have actually been so listed by that date.
The attention of the contractors is called to these requirements, and manufacturers are urged to
arrange to have the products that they propose to offer to the Federal Government tested for
qualification in order that they may be eligible to be awarded contracts or purchase orders for the
products covered by this specification. Information pertaining to qualification of products may be
obtained from the Commander, Naval Air Warfare Center Aircraft Division, Attn: Code 4.3.4.1,
Building 2188, 22347 Cedar Point Road, Unit 6, Patuxent River, MD 20670-1161.
6.4 Material Safety Data Sheet. Contracting officer will identify those activities requiring
copies of completed Material Safety Data Sheets prepared in accordance with FED-STD-313.
The pertinent Government mailing addresses for submission of data are listed in FED-STD-313;
and 29 CFR 1910.1200 requires that the Material Safety Data Sheet for each hazardous chemical
used in an operation must be readily available to personnel using the material. Contracting
officers will identify the activities requiring copies of the Material Safety Data Sheets.
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business