MIL-PRF-2104J
1.3 Part or identifying number (PIN). PINs to be used in procurement of the
lubricating oils acquired to this specification are created as follows: Example of
reference part number: M2104 R-II-2
M 2104 X - X - X
Container size
1 = 946 mL (1-quart)
2 = 3.785 L (1-Gallon)
3 = 18.925 L (5-Gallon pail)
4 = 208.175 L (55-Gallon drum)
5 = Bulk in gallons
SAE viscosity grade
I = 10W
II = 30
III = 40
IV = 15W-40
Base oil content
R = Contains a minimum of 25% re-refined base oil
V = Contains less than 25% re-refined base oil
Specification number
M prefix
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4
or 5 of this specification. This section does not include documents cited in other
sections of this specification or recommended for additional information or as examples.
While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in
sections 3, 4 and 5 of this specification, whether or not they are listed.
2.2 Government documents. This section is not applicable.
2.3 Non-Government publications. The following documents form a part of this
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business