MIL-DTL-17111E
3.2.5 Workmanship. The fluid shall be processed in accordance with high grade
commercial practice and shall be clear and transparent, entirely homogenous, and free from lumps
of undissolved additive, water, dirt, lint, or sediment.
3.3 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or
environmentally preferable materials should be used to the maximum extent possible, provided that
the material meets or exceeds the operational and maintenance requirements and promotes
economically advantageous life cycle costs.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are
classified as follows:
a. First article inspection (see 4.3).
b. Conformance inspection (see 4.4).
4.2 Sampling for conformance inspection. A representative sample of material shall be
selected at random in accordance with the sampling method of ASTM D4057 (manual) or ASTM
D4177 (automatic). Failure of any conformance test shall result in rejection of the lot (see 6.3.1).
In addition, a random sample of base stock shall be selected for each lot of the finished fluid and
subjected to all the applicable conformance tests for base stock.
4.3 First article inspection. A first article inspection shall be performed on the initial
production-representative unit of order or when required in the acquisition order. When a first
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business