MIL-PRF-63460E
4. VERIFICATION
TABLE III. Requirement/verification cross-reference matrix.
Property
Section 3
Section 4
Qualification Conformance
Requirement
Verification
Testing
Inspection
Qualification
3.1
4.1.1
X
Conformance inspection
3.1.1
4.1.2
X
Graphite
3.2.1
4.2.1
X
X
ODSs
3.2.2
4.2.2
X
X
Toxicity and hazardous materials
3.2.3
4.2.3
X
X
Color and appearance
3.2.4
4.2.4
X
X
Flash Point
Table I
Table IV
X
X
Pour Point
Table I
Table IV
X
X
Viscosity, Kinematic @ + 40 °C (104 °F)
Table I
Table IV
X
X
Viscosity, Kinematic @ -40 °C (-40 °F)
Table I
Table IV
X
X
Wear Preventive Characteristics
Table I
Table IV
X
X
Falex Load Carrying Capacity
Table I
4.2.6
X
X
Corrosion Production
3.3.1
4.3.1
X
X
Chemical Agent Detector Paper
3.3.2
4.3.2
X
X
Humidity Resistance
3.4.1
4.4.1
X
X
Salt-spray Resistance
3.4.2
4.4.2
X
X
Corrosion-Propellant Reaction
3.4.3
4.4.3
X
X
Water Displacement/Stability
3.4.4
4.4.4
X
X
Firing Residue Removal
3.5.1
4.5.1
X
X
Cold Temp - Weapons Firing
3.5.2.1
4.5.2.3
X
Sand/dust - Weapons Firing
3.5.2.2
4.5.2.4
X
Salt Water Immersion-Weapons Firing
3.5.2.3
4.5.2.5
X
4.1
Classification of inspection. Inspection requirements specified herein are as follows:
a. Qualification inspection (see 4.1.1).
b. Conformance inspection (see 4.1.2).
4.1.1 Qualification inspection. Upon formal application, CLP qualification inspection shall
consist of specified tests for all requirements specified in Section 3, (see Table III). If a product
sample fails to meet any of the requirements specified in Section 3, that product shall not be
qualified, and shall not be listed on the QPL.
4.1.1.1 Qualification samples. Qualification testing shall require three gallons of product.
If the final formulation contains solid materials, a one-half gallon sample shall be provided
identical to the final product but without the addition of solid materials.
4.1.2 Conformance inspection. When specified, conformance inspection of production lots
(See 6.9.4) shall consist of specified tests for all the requirements specified in Section 3 except
for live-fire weapons tests (see Table III).
4.1.2.1 Rejection of lots. If a product sample fails to pass any of the specified tests, the
production lot represented by that sample, shall be rejected.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business