For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

MIL-PRF-6083 Hydraulic Fluid, Petroleum Base, For Preservation And OperationThis specification describes the characteristics and provides the requirements for one grade of petroleum base hydraulic fluid for use in the -54??C to +135??C temperature range \(see 6.1\). This fluid is rust inhibited and used both as a preservative for hydraulic systems and components as well as being an operational fluid. This hydraulic fluid will not be used for aircraft systems, aircraft ground support equipment, or the preservation of aircraft components. The hydraulic fluid is identified by Military Symbol OHT and NATO Symbol C-635.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11


. .
MIL-PRF-6083G
Potentiometric Titration (DoD Adopted).
- Standard Test Method for Foaming Characteristics of Lubricating Oils (DoD
ASTM D892
Adopted).
- Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
ASTM D972
(DoD Adopted).
ASTM D1193
- Standard Specification for Reagent Water (DoD Adopted)
ASTM D1298
- Standard Test Method for Density, Relative Density, or API Gravity of Crude
Petroleum and Liquid Petroleum Products by Hydrometer Method (DoD
Adopted)
- Standard Test Method for ASTM Color of Petroleum Products (ASTM Color
ASTM D1500
Scale) (DoD Adopted).
- Standard Test Method for Rust Protection by Metal Preservatives in the
ASTM D1748
Humidity Cabinet (DoD Adopted).
- Standard Test Method for Trace Sediment in Lubricating Oils (DoD Adopted).
ASTM D2273
- Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils
ASTM D2603
(DoD Adopted)
- Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D4057
(DoD Adopted).
ASTM D4172
- Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid
(Four-Ball Method) (DoD Adopted).
- Standard Terminology Relating to Petroleum, Petroleum Products, and
ASTM D4175
Lubricants (DoD Adopted).
- Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D4177
(DoD Adopted).
- Standard Test Method for Elastomer Compatibility of Lubricating Greases and
ASTM D4289
Fluids (DoD Adopted).
- Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic
ASTM D4636
Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils (DoD
Adopted).
- Standard Test Method for Insoluble Contamination of Hydraulic Fluids by
ASTM D4898
Gravimetric Analysis (DoD Adopted).
- Standard Test Method for Determination of Water in Petroleum Products,
ASTM D6304
Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
- Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic
ASTM D6547
Couple
- Standard Test Method for Determination of Isothermal Secant and Tangent
ASTM D6793
Bulk Modulus
(Copies of these documents are available from ASTM International, 100 Barr Harbor Drive, West
Conshohocken, PA 19428-2959, or at www.astm.org).
SAE International
SAE AMS3217/2
- Test Slabs, Acrylonitrile Butadiene (NBR-L), Low
Acrylonitrile, 65-75
(Copies of this document are available from SAE World Headquarters, 400 Commonwealth
Drive, Warrendale, PA 15096-0001, or at https://www.sae.org.)
3



For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.