MIL-PRF-6081D
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or order
(see 6.2). When actual packaging of material is to be performed by DoD personnel, these personnel need to contact
the responsible packaging activity to ascertain requisite packaging requirements. Packaging requirements are
maintained by the Inventory Control Point's packaging activity within the Military Department or Defense Agency,
or within the Military Department's System Command. Packaging data retrieval is available from the managing
Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting the
responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. The lubricating oil procurable to this specification is intended for the use in specific models of
aircraft jet engines.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a.
Title, number, grade, and date of this specification, including any amendments.
b.
Issue of DoDISS to be cited in the solicitation and, if required, the specific issue of individual documents
referenced (see 2.2 and 2.3).
c.
Type and size of containers required (see 5.1).
d.
Quantity desired.
e.
Submittal of conformance test results (see 4.3.3).
f.
If certification of conformance to material prohibitions is required (see 3.2).
6.3 Qualification. With respect to products which require qualification, awards will be made only for products
which are, at the time of award of contract, qualified for inclusion in QPL-6081 whether or not such products have
actually been so listed by that date. The attention of the contractors is called to these requirements, and
manufacturers are urged to have the products they propose to offer to the Federal Government tested for qualification
in order that they may be eligible to be awarded contracts or purchase orders for the products covered by this
specification. The activity responsible for the Qualified Products List is the Propulsion Directorate, ATTN:
AFRL/PRSL, Bldg 490, 1790 Loop Road North, Wright-Patterson AFB OH 45433-7103, and information pertaining
to qualification of products may be obtained from that activity. To initiate the qualification process, prospective
suppliers will forward a written request for such action to the Propulsion Directorate at the above address. This letter
will contain general information on the proposed candidate material. The Propulsion Directorate will respond,
providing detailed instructions for the submission of product samples and test data.
6.3.1 Reblend lubricating oil qualification. A reblend lubricating oil is an original qualified lubricating oil as
specified in 4.2, in which one or more ingredients have been blended by a manufacturer other than the manufacturer
of the original formulation. A bulk lot of the reblended oil will be subjected to the qualification tests (see 4.2).
Reblend approvals may be initiated by the process described in 6.3.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business