MIL-PRF-6081D
3.4 Workmanship. The finished lubricating oil shall be transparent and uniform in appearance, and free from
cloudiness, suspended matter, or other adulterations when examined visually by transmitted light.
3.5 Material safety data sheets. Material safety data sheets shall be prepared and submitted in accordance with
FED-STD-313 (see 6.4).
4. VERIFICATION
4.1 Classification of inspections. The inspection and testing of lubricating oils shall be classified as follows:
a.
Qualification inspection (see 4.2).
b.
Conformance inspection (see 4.3).
4.2 Qualification inspection. Qualification inspection shall consist of testing to all the requirements specified in
section 3 and table I. When required by the qualifying activity, additional evaluations may be required on candidate
formulations.
4.2.1 Qualification inspection sample. The qualification test sample shall consist of two gallons of finished
lubricating oil, one gallon of the petroleum oil-base stock before the addition of ingredients, and one ounce of each of
the additive ingredients used in the manufacture of the qualification sample; and shall be submitted prior to
qualification. In the event that additives are supplied as concentrated solutions, an equivalent quantity of the solution
shall be furnished. Each lubricant ingredient submitted shall be from the same bulk lot used in preparation of the
qualification test sample. Upon receiving authorization from AFRL/PRSL, these samples shall be forwarded to
AFRL/PRSL, Bldg 490, 1790 Loop Road North, Wright-Patterson AFB OH 45433-7103. Each sample shall be
plainly identified by a securely attached, durable label marked with the following information:
QUALIFICATION INSPECTION SAMPLE
LUBRICATING OIL, JET ENGINE,
MIL-PRF-6081
Type of sample: (basestock, additive, or finished oil)
Classification of oil: (Grade 1005 or Grade 1010)
Name of manufacturer:
Product code number:
Batch number:
Date of manufacture:
Submitted by (name) on (date) for qualification inspection in accordance with MIL-PRF-6081 under
authorization of (reference authorization letter, see 6.3).
4.2.2 Qualification inspection test report. The manufacturer shall forward a letter to the activity responsible for
qualification (see 6.3) before the test sample is supplied. The letter shall contain the following:
a. Request for authorization to submit test sample for qualification.
b. Certified test report that contains data on the specific batch of test sample to be submitted showing results of
the tests specified herein.
c. Complete formulation data, including chemical composition, percentages of each ingredient, the
manufacturer and trade name of each ingredient, and the purity of each ingredient. Formulation data will be
respected as highly proprietary information.
d. Verification that the composition of the test sample complies with the requirements of 3.2.
e. Identification of the manufacturing site of the specific batch of test sample to be submitted.
f. MSDS (see 3.5) of the candidate product and for each of the additive components used in the formulation.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business