MIL-PRF-46010H
naphtha, aliphatic followed by acetone or any environmentally safe cleaner that
sufficiently cleans surfaces to pass ASTM F22.
8
Treat the metal surfaces in accordance with 4.4.2.1.
9
Treat the metal surfaces in accordance with 4.4.2.2.
4.5.2 Solids content. Stir the lubricant thoroughly, weigh 5.0 ± 0.5 grams into a
disposable weighing dish (e.g., Fisher Scientific catalog number 08-732 or equivalent). Place the
dish and contents into a forced draft oven maintained at a temperature of 49 ± 3°C for 18 1
hours. Remove dish from oven and place in desiccator. Raise temperature of oven to 204 ± 3°C
and replace dish with residue into the oven for 1 additional hour. Remove dish and contents and
cool in a desiccator. When cool, weigh dish and contents. Calculate percent by weight of solids
in fluid lubricant as follows:
Weight of solid materials (grams)
Percent total solids
= ------------------------------------------- X 100
Weight of sample (grams)
4.5.3 Storage stability. Set aside a one-quart qualification sample in a storage area
maintained at 25 ± 3°C for a period of 365 ± 7 days. At the end of the storage period, determine
the endurance life (see 3.7), of the cured lubricant film, the sulfurous acid - salt spray (see 3.10)
and the salt-spray (fog) test (see 3.11).
4.5.4 Volatile organic compound content. The volatile organic compound content shall
be determined in accordance with ASTM D3960; determine the non-volatile content in
accordance with ASTM D2832; determine the water content in accordance with ASTM D4017,
determine the density in accordance with ASTM D1475; and determine exempt solvents in
accordance with ASTM D4457. The VOC content calculation shall be performed in accordance
with ASTM D3960.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be specified
in the contract or order (see 6.2). When actual packaging of materiel is to be performed by DoD
personnel, these personnel need to contact the responsible packaging activity to ascertain
requisite packaging requirements. Packaging requirements are maintained by the Inventory
Control Point s packaging activity within the Military Department or Defense Agency, or within
the Military Department s or Defense Agency s automated packaging files, CD-ROM products,
or by contacting the responsible packaging activity.
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business