MIL-PRF-3150E
TABLE II. Requirements
PHYSICAL PROPERTIES
METHOD
VALUES
Viscosity @ 40°C, Kinematic, (mm2/s)
ASTM D445
95 to 125
Pour Point, °C, max.
ASTM D97
-6
Evaporation loss at 100°C, max.
ASTM D972
5%
3.6.2 Pour point. The maximum pour point of the oil shall be no greater than 6° C (see
TABLE II and 4.5.2).
3.6.3 Evaporation loss. The maximum mass percent evaporation loss of the oil shall not
be greater than 5% (see TABLE II and 4.5.3).
4. VERIFICATION.
4.1 Classification of inspections. The inspection requirements as specified herein are
classified as follows.
a.
Qualification inspection (see 4.1.1).
b.
Conformance inspection (see 4.1.2).
TABLE III. Requirements/verification cross-reference matrix
Property
Section 3
Section 4
Qualification Conformance
Requirement Verification
Testing
Inspection
Materials
3.2
4.2
Recycled, recovered, or
3.2.1
4.2.1
environmentally preferable materials
Tolerances
3.3.1
4.3.1
X
Toxicity
3.3.2
4.3.2
X
Toxicity warning label
3.3.2.1
4.3.2.1
X
Workmanship
3.3.3
4.3.3
X
Copper strip corrosion
3.4.1
4.4.1
X
X
Removability
3.4.2
4.4.2
X
Humidity protection
3.5.1
4.5.1
X
Salt-spray resistance
3.5.2
4.5.2
X
Accelerated stability
3.5.3
4.5.3
X
Low temperature stability
3.5.4
4.5.4
X
Storage stability
3.5.5
4.5.5
X
Viscosity, kinetic @ 40°C
TABLE II
4.6.2
X
X
Pour point
TABLE II
4.6.3
X
X
Evaporation loss
TABLE II
4.6.4
X
X
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business