INCH-POUND
MIL-PRF-18458C
5 July 2002
SUPERSEDING
MIL-G-18458B(SHIPS)
19 March 1981
(See 6.8)
PERFORMANCE SPECIFICATION
GREASE, WIRE ROPE - EXPOSED GEAR
This specification is approved for use by all Departments and Agencies
of the Department of Defense.
1.
SCOPE
1.1
Scope. This specification covers corrosion resistant externally
applied grease for use on wire ropes and exposed gears of hoists, winches,
cranes, shovels, dredges, and other similar equipment.
1.2
Classification. Two types of grease are specified: a Type I for
general application and an environmentally preferable Type II for applications
where potential discharge to the environment is greater.
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in
sections 3 and 4 of this specification. This section does not include
documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they
must meet all specified requirements documents cited in sections 3 and 4 of
this specification, whether or not they are listed.
Beneficial comments (recommendations, additions, deletions) and any
pertinent data which may be of use in improving this document should be
addressed to: Commander, Naval Sea Systems Command, ATTN: SEA 05Q, 1333
Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160, by
using the self-addressed Standardization Document Improvement Proposal (DD
Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 9150
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is
unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business