MIL-PRF-12070E
3.6 White oil purity. The product shall have an absorbance value of less than 200 units at
280 to 290 nanometers (nm) (see 4.5.3.3).
3.7 Item identification. Unless otherwise specified (see 6.2), marking shall be permanent and
legible and as a minimum, shall include marking identification code (CAGE), the contract number
and National Stock Number (NSN).
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified
as follows:
a. First article inspections (see 4.2).
b. Conformance inspections (see 4.3).
4.2 First article inspection. First article inspections shall be performed on one or more lots
(see 4.4 and 6.3). The actual quantity of lots (see 6.3) to be inspected shall be as specified in the
contract or order (see 6.2). Inspections for first article of individual lots (see 6.3) shall be as
specified in table II.
4.3 Conformance inspection. Inspections shall be performed in accordance with table II.
Table II. Classification of Inspections and tests.
Tests
Title
Requirement
Inspection
Conformance
First article
Materials
3.2
4.5.2
X
X
Appearance
3.3
4.5.1
X
X
Chemical & physical
3.4
4.5
X
X
characteristics
(see table III)
(see table III)
1
Carcinogenicity
3.5.1
4.5.3.1
X
X
1
Mutagenicity
3.5.2
4.5.3.2
X
X
1
FDA White oil purity
3. 6
4.5.3.3
X
X
1 If the carcinogenicity test is not available, then the mutagenicity and white oil purity tests
shall be performed on the lot/batch being supplied or inspected as in 4.5.3, or historical
information shall be used as indicated in contract or order in lieu of these inspections
(see 6.4).
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business