MIL-PRF-10924H
within this temperature range where a National Lubricating Grease Institute (NLGI) No. 2
consistency grease with oxidation resistant and corrosion prevention properties is desirable. This
grease is not intended for use on machinery which comes in contact with food. This specification
requires a grease that is capable of lubrication and corrosion protection over an extremely wide
range of temperatures; there is no currently available non-government standard which fulfills the
requirements of this specification.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a.
Title, number and date of this specification.
b.
The specific issue of individual documents referenced (see 2.3).
c.
Quantity of grease requested, in kilograms.
d.
Size and type of container for grease.
e.
Tolerances for finished oil requirements (see table I and 4.1.1.1).
f.
If conformance testing is other than as specified (see 4.1.2).
g.
Packaging requirements, quantity and PIN (see 5.1 and 6.3).
6.3 Part or identifying number (PIN) configuration. The PIN to be used for oils
acquired to this specification are created as follows:
M
10924
X
Dash number and container size
A = 2.25 oz
B = 14 oz
C = 1.75 lb
D = 6.50 lb
E = 35 lb
F = 120 lb
Specification number
Prefix for military specification
6.4 Qualification. With respect to products requiring qualification, awards will be made
only for products which are at the time of award of contract, qualified for inclusion in Qualified
Products List QPL No. 10924 whether or not such products have actually been so listed by that
date. The attention of the contractors is called to these requirements, and manufacturers are
urged to arrange to have the products that they propose to offer to the Federal Government tested
for qualification in order that they may be eligible to be awarded contracts or purchase orders for
the products covered by this specification. Information pertaining to qualification of products
may be obtained from US Army Tank-automotive and Armaments Command, Warren,
Michigan 48397-5000.
6.5 Conformance testing. Affordable conformance inspection with confidence varies
depending upon a number of procurement risk factors. Some of these factors include:
Contractor past performance, government schedules and budget, product material and design
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business