MIL-PRF-10924H
maturity, manufacturing capital equipment and processes applied, the controlled uniformity of
those processes, labor skill and training, and the uniformity of measuring processes and
techniques. During the solicitation, contracting documents should indicate those tests desired
from table II and their designated frequency based on a risk assessment for the procurement.
6.6 Material Safety Data Sheets. Contracting officers will identify those activities
requiring copies of completed Material Safety Data Sheets prepared in accordance with
FED-STD-313. The pertinent Government mailing addresses for submission of data are listed in
FED-STD-313; and 29 CFR 1910.1200 requires that the Material Safety Data Sheet for each
hazardous chemical used in an operation must be readily available to personnel using the
material. Contracting officers will identify the activities requiring copies of the Material Safety
Data Sheet.
6.7 National stock numbers. The following National Stock numbers have been assigned
to the grease covered by this specification:
Grease
National Stock No.
Tube, 2-1/4 oz. (64 g)
9150-01-197-7688
Cartridge, 14 oz. (400 g)
9150-01-197-7693
Can, 1.75 lb (800 g)
9150-01-197-7690
Can, 6.50 lb (3 kg)
9150-01-197-7689
Pail, 35 lb (16 kg)
9150-01-197-7692
Drum, 120 lb (54 kg)
9150-01-197-7691
6.8 Subject term (key word) listing.
Grease
Corrosion, surface protection
Lubricating grease, ground vehicles
(NLGI), No. 2 consistency
Biodegradability
6.9 International Standardization Agreement. Certain provisions of this specification are
subject to international standardization agreement STANAGs 1135 and 2845. When
amendment, revision, or cancellation of this specification is proposed which will modify the
international agreement concerned, the preparing activity will take appropriate action through
international standardization channels, including departmental standardization offices, to change
the agreement or make other appropriate accommodations.
6.10 Changes from previous issue. Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business