MIL-DTL-83767C
4.3 Sampling. Sampling for packaged lots and sampling for tests shall be as follows:
4.3.1 Packaged lot. A random sample of packaged containers shall be selected from
each lot in accordance with inspection level II of MIL-STD-1916. The sample shall be
examined in accordance with 4.4.1.
4.3.2 Sampling for tests. Samples shall be selected for tests in accordance with
ASTM D 4057. The samples shall be tested in accordance with 4.4.2.
4.4 Conformance inspection. Conformance inspection shall be performed in accordance
with method 9601 of FED-STD-791, the examination of 4.4.1, and the tests of 4.4.2.
4.4.1 Examination of the preparation for delivery. Samples taken in accordance with
4.3.1 shall be examined for compliance with MIL-STD-290 with regard to fill, closure, sealing,
leakage, packaging, packing, and marking requirements. Any container having one or more
defects or under the required fill shall be rejected.
4.4.2 Tests. The following tests shall be conducted in accordance with the applicable
test method given in table III.
TABLE III. Tests.
Test
Test method
Specific gravity
ASTM D 1298
Viscosity
ASTM D 445
Flash point
ASTM D 92
ASTM D 97
Pour point
or ASTM D 5949
Fire point
ASTM D 92
Copper corrosion
ASTM D 130
Acid or base no.
ASTM D 664
Evaporation loss
ASTM D 972
Carbon residue
ASTM D 524
Corrosion and
ASTM D 4636
oxidation stability
Foaming characteristics
ASTM D 892
Aniline point
ASTM D 611
Viscosity index
ASTM D 2270
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business