MIL-DTL-83767C
1.3 Part or identifying number (PIN). The PIN to be used for vacuum pump oil acquired
to this specification is created as follows:
M 83767 - 1
Type: 1 = type I
2 = type II
3 = type III
4 = type IV
Specification number
M prefix
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of the documents cited in sections 3 and 4 of this specification, whether or not they
are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract (see 6.2).
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-290
- Packaging and Marking of Petroleum and Related
Products.
MIL-STD-1916
- DoD Preferred Methods for Acceptance of Product.
(Copies of these documents are available online at https://assist.daps.dla.mil or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA
19111-5094.)
2.3 Non-government publications. The following documents form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract (see 6.2).
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business