NOT MEASUREMENT SENSITIVE
VV-C-846D
27 September 2010 SUPERSEDING
VV-V-846C
19 August 2005
FEDERAL SPECIFICATION CUTTING FLUIDS: EMULSIFIABLE OILS
The General Services Administration has authorized the use of this federal specification by all federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. This specification covers three types of emulsifiable oils, which, when diluted with water, are intended for use in metal-cutting operations (see 6.1).
1.2 Classification.
1.2.1 Type. The cutting fluids shall be of the following types, as specified (see 6.2).
Type I - mineral oil and emulsifier (NATO code number O-214, military symbol OS) Type II - mineral oil, fatty oil, and emulsifier
Type III - mineral oil, emulsifier, and extreme pressure additives
1.3 International standardization agreement code number.
STANAG 1135 (see 6.6)
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data that may improve this document should be sent to: STDZNMGT@dla.mil or Defense Supply Center Richmond, ATTN: DSCR-VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616. Since contact information can change, you may want to verify the currency of this address information using the ASSIST database at https://assist.daps.dla.mil.
AMSC N/A FSC 9150
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business