MIL-PRF-81322G
·
Manufacturer's product number.
·
Batch number.
·
Date of manufacture.
·
Submitted by (name and date), for qualification inspection in accordance with
MIL-PRF-81322G, under authorization of (reference authorization letter).
6.3.2 Retention of qualification. In order to retain qualification of a product approved for
listing on the Qualified Products List (QPL), the Government will require the manufacturer to
verify by certification to the qualifying activity that the manufacturer's product complies with the
requirements of this specification. The time of periodic verification by certification will be in
two-year intervals from the date of original qualification and will be initiated by the Government.
The Government reserves the right to re-examine the qualified product whenever deemed
necessary to ensure that the product continues to meet any or all of the specification
requirements.
6.3.3 Requalification. Any change in the formulation of a qualified product will necessitate
requalification.
6.4 Lot and batch. Unless otherwise specified a lot consists of the grease produced by one
manufacturer at one plant, from the same materials and under essentially the same conditions,
provided the operation is continuous and does not exceed a 24-hour period. In the event the
process is a batch operation, each batch shall constitute a lot. A batch is the quantity of material
which has been manufactured by some unit chemical process and subjected to some physical
mixing operation intended to make the final product substantially uniform.
6.5 Material Safety Data Sheets (MSDSs). MSDSs for items supplied to the government
are required to conform to FED-STD-313, "Material Safety Data, Transportation Data and
Disposal Data For Hazardous Materials Furnished to Government Activities."
6.6 Standard rubber samples. Samples of the standard synthetic rubber NBR-L (see table I)
may be obtained from the Akron Rubber Co., Akron, OH.
6.7 International standardization agreements implementation. This specification
implements AIR-STD-15/9, "Interchangeability of Standardized Aviation Fuels, Lubricants and
Associated Products" and STANAG 1135, "Interchangeability of Fuels, Lubricants and
Associated Products Used by the Armed Forces of the North Atlantic Treaty Nations." When
amendment, revision, or cancellation of this specification is proposed, the preparing activity must
coordinate the action with the U.S. National Point of Contact for the international standardization
agreement, as identified in the ASSIST database at https://assist.daps.dla.mil.
6.8 ASTM-D130 availability. ASTM-D130 adjunct, available from ASTM as number
12-401300-00.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business