MIL-PRF-5606 Hydraulic Fluid, Petroleum Base; Aircraft, Missile, And OrdnanceThis specification describes the characteristics and provides the requirements for a petroleum base hydraulic fluid for use in the -54 Deg. C to +135 Deg. C temperature range \(see 6.1\). This fluid is identified by military symbol OHA and NATO Code No. H-515 \(see 6.5\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11

MIL-PRF-5606H

ASTM D 2603

Test Method for Sonic Shear Stability of Polymer-Containing Oils

(DoD adopted)

ASTM D 4057

Standard Practice for Manual Sampling of Petroleum and

Petroleum Products

ASTM D 4172

Standard Test Method for Wear Preventive Characteristics of

Lubricating Fluid (Four-Ball Method) (DoD adopted)

ASTM D 4177

Standard Practice for Automatic Sampling of Petroleum and

Petroleum Products (DoD adopted)

ASTM D 4636

Standard Test Method for Corrosiveness and Oxidation Stability of

Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other

Highly Refined Oils (DoD adopted)

ASTM D 4898

Standard Test for Insoluble Contamination of Hydraulic Fluids by

Gravimetric Analysis (DoD adopted)

ASTM D 5185

Standard Test Method for Determination of Additive Elements,

Wear Metals, and Contaminants in Used Lubricating Oils and

Determination of Selected Elements in Base Oils by Inductively

Coupled Plasma Atomic Emission Spectrometry (ICP-AES) (DoD

adopted)

ASTM D 5949

Standard Test Method for Pour Point of Petroleum Products

(Automatic Pressure Pulsing Method)

ASTM D 6304

Standard Test Method for Determination of Water in Petroleum

Products, Lubricating Oils, and Additives by Coulometric Karl

Fisher Titration

(Application for copies should be addressed to ASTM International, 100 Barr Harbor

Drive, PO Box C700, West Conshohocken, Pennsylvania, USA 19428-2959. Order

online at www.astm.org.)

AMERICAN SOCIETY FOR QUALITY CONTROL

ASQ Z1.4

Sampling Procedures and Tables for Inspection by Attributes

(DoD adopted)

(Application for copies should be addressed to American Society for Quality Control, 611

East Wisconsin Avenue, Milwaukee, WI 53202. Order online at https://www.ASQ.org.)

SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)

SAE AMS 3217/2

Test Slabs, Acrylonitrile Butadiene (NBR-L), Low Acrylonitrile, 65 -

75 (DoD adopted)

(Application for copies should be addressed to SAE, Inc., 400 Commonwealth Drive,

Warrendale, PA 15096-0001. Order online at https://www.sae.org.)

(Non-Government standards and other publications are normally available from the

organizations that prepare or distribute the documents. These documents also may be

available in or through libraries or other informational services.)