MIL-PRF-46170 Hydraulic Fluid, Rust Inhibited, Fire Resistant, Synthetic Hydrocarbon Base, Nato Code No. H-544This specification covers the requirements for one type of synthetic hydrocarbon base hydraulic fluid \(see 6.1\) for use in the -40 degrees C to 200 degrees C temperature range in recoil mechanisms and ground vehicle and equipment hydraulic systems. This hydraulic fluid will not be used for aircraft systems, aircraft ground support equipment, or the preservation of aircraft components.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12

MIL-PRF-46170E

MIL-PRF-83282 -

Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon

Base, Metric, NATO Code Number H-537.

MIL-PRF-87257 -

Hydraulic Fluid, Fire Resistant; Low Temperature,

Synthetic Hydrocarbon Base, Aircraft and Missile.

(Copies of the above specifications, standards, and handbooks are available from Document

Automation and Production Service, Building 4/D, 700 Robbins Avenue, Philadelphia, PA

19111-5094 or website: https://quicksearch.dla.mil)

2.3 Non-Government publications. The following documents form a part of this

document to the extent specified herein. Unless otherwise specified, the issues of these

documents those cited in the solicitation or contract (see 6.2).

ASTM INTERNATIONAL

ASTM D92

Standard Test Method for Flash and Fire Points by

Cleveland Open Cup Tester (DoD Adopted).

ASTM D97

Standard Test Method for Pour Point of Petroleum Products

(DoD Adopted).

ASTM D130

Standard Test Method for Corrosiveness to Copper from

Petroleum Products by Copper Strip Test (DoD Adopted).

ASTM D445

Standard Test Method for Kinematic Viscosity of

Transparent and Opaque Liquids (and the Calculation of

Dynamic Viscosity) (DoD Adopted).

ASTM D664

Standard Test Method for Acid Number of Petroleum

Products by Potentiometric Titration (DoD Adopted).

ASTM D892

Standard Test Method for Foaming Characteristics of

Lubricating Oils (DoD Adopted).

ASTM D972

Standard Test Method for Evaporation Loss of Lubricating

Greases and Oils (DoD Adopted).

ASTM D1193

Standard Specification for Reagent Water

ASTM D1298

Standard Test Method for Density, Relative Density, or

API Gravity of Crude Petroleum and Liquid Petroleum

Products by Hydrometer Method (DoD Adopted).

ASTM D1748

Standard Test Method for Rust Protection by Metal

Preservatives in the Humidity Cabinet (DoD Adopted).

ASTM D2273

Standard Test Method for Trace Sediment in Lubricating

Oils (DoD Adopted).

ASTM D4057

Standard Practice for Manual Sampling of Petroleum and

Petroleum Products (DoD Adopted).

ASTM D4172

Standard Test Method for Wear Preventive Characteristics

of Lubricating Fluid (Four-Ball Method) (DoD Adopted).

ASTM D4177

Standard Practice for Automatic Sampling of Petroleum

and Petroleum Products (DoD Adopted).