NOT MEASUREMENT
SENSITIVE
MIL-PRF-46002D
20 January 2010
SUPERSEDING
MIL-PRF-46002C
14 July 2000
PERFORMANCE SPECIFICATION
PRESERVATIVE OIL, CONTACT AND VOLATILE CORROSION-INHIBITED
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers two grades of water-displacing, contact and
volatile, corrosion-inhibited preservative oil, known hereinafter as "oil", for use in the
preservation of material in enclosed systems.
1.2 Classification and part identifying number (PIN).
1.2.1 Grades. The oils are of the following grades, as specified (see 6.2).
Grade 1 - light viscosity oil.
Grade 2 - medium viscosity oil.
1.2.2 PIN. Oils furnished under this performance specification are identified by a PIN
consisting of; an "M" prefix and specification number, a single digit "Dash Number" which
indicates the viscosity grade of the oil.
Comments, suggestions, or questions on this document should be addressed to U.S. Army
RDECOM, Tank Automotive Research Development and Engineering Center, ATTN:
RDTA-EN/STND/TRANS, MS# 268, 6501 E. 11 Mile Road, Warren, MI 48397-5000 or
emailed to DAMI_STANDARDIZATION@conus.army.mil. Since contact information can
change, you may want to verify the currency of this address information using the ASSIST
Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 9150
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business