NOT MEASUREMENT
SENSITIVE
MIL-PRF-3572B
21 January 2000
SUPERSEDING
MIL-L-3572A
6 October 1983
PERFORMANCE SPECIFICATION
LUBRICANT, COLLOIDAL GRAPHITE IN OIL
This specification is approved for use by all Departments and Agencies of the Department of
Defense (DoD).
1. SCOPE
1.1 Scope. This specification covers colloidal graphite in oil lubricant primarily for
ordnance but may be used for other purposes (see 6.1).
1.2 Classification. The lubricant covered by this specification should be of the grades and
sizes, as specified (see 6.2):
Grade A - Light
Size I - 2.0 ounces
Grade B - Medium
Size II - 1.0 quart
Grade C - Heavy
Size III - 1.0 gallon
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements documents cited in sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be used in improving this document should be addressed to: Defense Supply Center Richmond,
Standardization Program Branch, ATTN: DSCR-VBD, 8000 Jefferson Davis Highway,
Richmond, VA 23297-5610 by using the Standardization Document Improvement Proposal
(DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 9150
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business