MIL-PRF-27617G
2.3 Non-Government publications. The following documents form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
ASTM International
ASTM D130
Standard Test Method for Corrosiveness to Copper from Petroleum
Products by Copper Strip Test (DoD Adopted)
ASTM D942
Standard Test Method for Oxidation Stability of Lubricating Greases by
the Oxygen Pressure Vessel Method (DoD Adopted)
Standard Test Method for Determining the Water
Washout
ASTM D1264
Characteristics of Lubricating Greases (DoD Adopted)
ASTM D1403
Standard Test Methods for Cone Penetration of Lubricating Grease
Using One-Quarter and One-Half Scale Cone Equipment (DoD Adopted)
ASTM D1478
Standard Test Method for Low-Temperature Torque of Ball Bearing
Grease (DoD Adopted)
ASTM D2266
Standard Test Method for Wear Preventive Characteristics of Lubricating
Grease (Four-Ball Method) (DoD Adopted)
ASTM D2512
Standard Test Method for Compatibility of Materials with Liquid Oxygen
(Impact Sensitivity Threshold and Pass-Fail Techniques) (DoD Adopted)
ASTM D2595
Standard Test Method for Evaporation Loss of Lubricating Greases Over
Wide-Temperature Range (DoD Adopted)
ASTM D2596
Standard Test Method for Measurement of Extreme-Pressure Properties
of Lubricating Grease (Four-Ball Method) (DoD Adopted)
ASTM D3336
Standard Test Method for Life of Lubricating Greases in Ball Bearings at
Elevated Temperatures (DoD Adopted)
ASTM D4057
Standard Practice for Manual Sampling of Petroleum and Petroleum
Products (DoD Adopted)
ASTM D6184
Standard Test Method for Oil Separation from Lubricating Grease
(Conical Sieve Method) (DoD Adopted)
(Copies of these documents are available online at https://www.astm.org or from ASTM International, 100
Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
SAE International
AMSM-7866
Molybdenum Disulfide, Technical, Lubrication Grade (DoD Adopted)
AMS-5046
Carbon Steel, Sheet, Strip, and Plate, (SAE 1020 and 1025), Annealed
(DoD Adopted)
(Copies of these documents are available online at https://www.sae.org or from SAE International, 400
Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a
conflict between the text of this document and the references cited herein, the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business