MIL-DTL-46014A
more than that shown for classification 1b of ASTM D130. On the steel square, a dark brown,
grey, or black stain shall be cause for rejection.
3.4 Contamination. The spindle oil shall contain not more than 1.0 mg of solid material
per liter of oil (see 4.6).
3.5 Recycled, recovered, or environmentally preferable materials. Recycled, recovered,
or environmentally preferable materials should be used to the maximum extent possible,
provided that the material meets or exceeds the operational and maintenance requirements, and
promotes economically advantageous life cycle costs.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirement specified herein is
classified as conformance inspection (see 4.2).
4.2 Conformance inspection. Conformance inspection shall include the lotting of 4.3
and sampling of 4.4.
4.3 Lot.
4.3.1 Bulk lot. An indefinite quantity of a homogeneous mixture of material offered for
acceptance in a single isolated container; or manufactured in a single plant run (not to exceed 24
hours), through the same processing equipment, with no change in ingredient material.
4.3.2 Packaged lot. An indefinite number of drums or other unit containers of identical
size and type, offered for acceptance, and filled with a homogeneous mixture of material from
one isolated container; or filled with a homogeneous mixture of material manufactured in a
single plant run (not to exceed 24 hours) through the same processing equipment with no change
in ingredient material.
4.4 Sampling.
4.4.1 Sampling for tests. Sampling of a lot for test purposes shall be done in accordance
with ASTM D4057 or ASTM D4177, as applicable.
4.5 Classification of tests. All tests are classified as conformance tests.
4.6 Test methods. Tests shall be performed in accordance with the applicable methods
listed in table II.
4.6.1 Contamination testing. Contamination testing shall be performed using local
methods adhering to government-approved industry best practices.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business