A-A-52039 Lubricating Oil, Automotive Engine, Api Service Sh (S/S By Sae-J2362)This CID describes lubricating oils meeting the American Petroleum Institute (API) SH performance category, SAE-J300, and the International Lubricant Standardization and Approval Committee (ISLAC) GF-1 Standard, and bearing the API Certification Mark (starburst symbol) in accordance with API 1509. These oils are suitable for the lubrication of spark-ignition, gasoline consuming engines used in administrative type, commercial vehicles.

Pages 1 - 2 - 3 - 4 - 5 - 6

A-A-52039B

5. QUALITY ASSURANCE PROVISIONS.

5.1 Responsibility for inspection. The contractor is responsible for the performance of all inspections (examinations and tests).

5.2 Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this CID, and that the product conforms to the producer’s own drawing, specifications, standards, and quality assurance practices. The contractor shall provide the required information in a tabulated format and with enough clarity so that the formulation of the tested product can be traced and compared to the offered product(s). The contractor shall provide a summary of performance data, consisting of test reports, substantiating that the product to be supplied under this CID meets SAE, ASTM, and API documents cited under 3.2 and 3.3 above. The contractor shall provide test results of the physical and chemical properties indicated under 3.3 above. The Government reserves the right to require proof of such performance prior to delivery and thereafter as may be otherwise provided for under the provisions of the contract.

5.3 Market acceptability (MA). The contractor shall provide which have a proven market record based on the number of items sold, length of time the product gas been on the market, and reliability and performance of the products as required under the contract or solicitation (see 7.2).

5.4 Inspection and testing. The inspection and testing of products to be supplied under this CID shall be as specified in the contract or order (see 7.2).

6. PACKAGING.

Preservation, packing, and marking shall be as specified in the contract or order. The container will be as specified in the contract or order (see 7.2).

7. NOTES.

(This section contains of a general or explanatory nature that may be helpful, but is not mandatory. )

7.1 Addresses for obtaining copies of referenced documents.

7.1.1 Copies of FED-STD-791 are available from the Defense Printing Service Detachment Office, Bldg. 4D (Customer Service), 700 Robbins Avenue, Philadelphia, PA 19111-5094.

7.1.2 Copies of 29 CFR 1910.1200 are available from the Superintendent of Documents, Government Printing Office, Washington, DC 20402.