MIL-PRF-81329D
(Application for copies should be addressed to the American Society for Testing and
Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
SOCIETY OF AUTOMOTIVE ENGINEERS, INC. (SAE)
SAE-AMS5510
-
Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate
18Cr - 10.5Ni-0.40Ti (SAE 30321) Solution Heat Treated.
(DoD adopted)
(Application for copies should be addressed to the Society of Automotive Engineers, Inc.
400 Commonwealth Drive, Warrendale, PA 15096.)
2.4 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1. First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.3.
3.2 Materials. Component materials used in the manufacture of this lubricant shall consist of
lubricating solids in a binder, at spraying consistency. Lubricant compositions furnished under
this specification shall contain no organic solvents or binders so as to be compatible with liquid
oxygen and radiation.
3.3 Physical and chemical properties.
3.3.1 Film appearance. Film appearance shall be uniform in color, smoothness, and
thickness; free of cracks, scratches, pinholes, blisters, bubbles, runs, sags, foreign matter, grit,
rough particles, separation of ingredients, or any other surface imperfections (see 4.5.2).
3.3.2 Film thickness. The film thickness shall be not greater than 0.025 mm nor less than
0.035 mm (see 4.5.3).
3.3.3 Film adhesion. The lubricant shall not expose any bare metal surface when tested
(see 4.5.4).
3.3.4 Thermal stability. The lubricant shall not flake, crack, or soften when tested
(see 4.5.5).
3.3.5 Endurance life. The lubricant endurance life shall be 60 minutes when subjected to a
454-kg applied load (see 4.5.6).
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business