METRIC
MIL-PRF-17331K(SH)
07 May 2013
SUPERSEDING
MIL-PRF-17331J(SH)
09 September 2003
PERFORMANCE SPECIFICATION
LUBRICATING OIL, STEAM TURBINE AND GEAR, MODERATE SERVICE
This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is
available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a single classification of steam turbine and gear lubricating oil, moderate
service, for use in main and auxiliary turbines and gears, air compressors, and certain hydraulic equipment, as well
as for general mechanical lubrication. The lubricating oil will be identified as follows:
Military symbol
NATO symbol
2190 TEP
O-250
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
NAVAL SEA SYSTEMS COMMAND (NAVSEA) PUBLICATIONS
S9510-AB-ATM-010
-
Nuclear Powered Submarine Atmosphere Control Manual
(Copies of the chapter titled "Material Control Program" are available from Commander, Naval Sea Systems
Command, ATTN: SEA 05Z4, 1333 Isaac Hull Ave. SE Stop 5122, Washington Navy Yard, DC 20376-5122 or by
email request to commandstandards@navy.mil.)
Comments, suggestions, or questions on this document should be addressed to: Commander, Naval Sea Systems
Command, ATTN: SEA 05S, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160 or
emailed to CommandStandards@navy.mil, with the subject line "Document Comment". Since contact information
can change, you may want to verify the currency of this address information using the ASSIST Online database at
https://assist.dla.mil.
AMSC N/A
FSC 9150
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business