INCH POUND
MIL-DTL-3918B
4 February 2011
SUPERSEDING
MIL-L-3918A
28 September 1970
MILITARY SPECIFICATION
LUBRICATING OIL, INSTRUMENT, JEWEL BEARING
Inactive for new design after 29 March 1999.
This specification is approved for use by all Departments and Agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers one grade of low-temperature, non-spreading
lubricating oil for use on instrumental jewel bearings.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure
the completeness of this list, document users are cautioned that they must meet all specified
requirements of the documents cited in sections 3 and 4 of this specification, whether or not they are
listed.
2.2 Government documents.
2.2.1 Standards. The following standards form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to Defense Supply
Center Richmond, ATTN: DLA Aviation - VEB, 8000 Jefferson Davis Highway, Richmond,
VA 23297-5616 or e-mailed to STDZNMGT@dla.mil. Since contact information can change,
you may want to verify the currency of this address information using the ASSIST database at
AMSC N/A
FSC 9150
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business