An Integrated Publishing, Inc. Site

An Integrated Publishing Website

Oils Greases Cutng Lube Hydraulic Mil-Specs - FSC 9150

A-A-50493 - Oil, Penetrating (for Loosening Frozen Metallic Parts)

This commercial item description (CID) establishes the government acquisition requirements for penetrating oil to be used for freeing of corroded and frozen metallic parts resisting movement, without causing damage to such parts. The penetrating oil is applied to metal surfaces to break down rust and corrosion, reduce friction, and retard corrosion.

A-A-50634 - Lubricating Oil, Ester-Based, For Compressors Using Hfc-134A Refrigerant

This commercial item description (CID) covers polyolester-based lubricating oils for Navy compressors using HFC-134a refrigerant.

A-A-52039 - Lubricating Oil, Automotive Engine, Api Service Sh (S/S By Sae-J2362)

This CID describes lubricating oils meeting the American Petroleum Institute (API) SH performance category, SAE-J300, and the International Lubricant Standardization and Approval Committee (ISLAC) GF-1 Standard, and bearing the API Certification Mark (starburst symbol) in accordance with API 1509. These oils are suitable for the lubrication of spark-ignition, gasoline consuming engines used in administrative type, commercial vehicles.

A-A-52306 - Lubricating Oil, Heavy-Duty Diesel Engine (S/S By Sae-J2363)

This CID describes lubricating oils meeting the American Petroleum Institute (API) performance categories CF, CF-2, and CG-4, and SAE J300. Lubricating oils covered by this CID are only intended for use in compression-ignition (diesel) engines in tactical-wheeled vehicles and are not intended for use in transmissions or hydraulic systems. This CID is not a replacement for MIL-L-2104 "Lubricating Oil, Internal Combustion Engine, Tactical/Combat Service".

C-C-800 - Cutting Oil, Base, Sulfurized Lard Oil (Use Vv-C-850)

C-O-376 - Oil, Lard

DOD-G-24508 - ( Images) Grease, High Performance, Multipurpose (Metric)

This specification covers one grade of grease for multi-purpose use and use in grease lubricated ball and roller bearings operating continuously at temperatures up to 149 Deg. Celsius (C) (300 Deg. Fahrenheit (F)) and intermittently up to 177 Deg. C (350 Deg. F) for periods up to 4 hours in any 24-hour period.

DOD-G-24650 - Grease, Food Grade, Food Processing Equipment (Metric)

This specification covers greases for use in food processing equipment in applications where there may be incidental contact with food.

DOD-G-85733 - ( Images) Grease, High Temperature, Catapult System

This specification covers the requirements for one type and grade of a high temperature grease for uses at temperatures from -29degrees C to 260 degrees C and for brief periods of use at temperatures up to 370 degrees C (see 6.1).

DOD-L-24651 - Lubricating Oil, Food Grade, Food Processing Equipment (Metric)

This specification covers lubricating oils for use in food processing equipment in applications where there my be incidental contact with food.

DOD-L-81846 - ( Images) Lubricating Oil, Instrument, Ball Bearing, High Flash Point

This specification covers the requirements for one grade of a specialty lubricating oil for use in precision instrument and miniature ball bearings.

DOD-L-85645 - Lubricant, Dry Film, Molecular Bonded

This specification establishes the requirements for two types of dry thin film lubricants to reduce wear and to prevent galling and seizure of metals.

DOD-PRF-24574 - ( Images) Lubricating Fluid For Low And High Pressure Oxidizing Gas Mixtures

This specification covers lubricating fluid for use in oxidizing gas systems, including oxygen and compressed air. The lubricating fluid is intended for use with oxygen systems at all pressures, and for air and oil-free nitrogen systems at pressures above 10,300 kilopascals (kpa) (1500 pounds per square inch (lb/in2)).

DOD-PRF-85734 - Lubricating Oil, Helicopter Transmission System, Synthetic Base

This specification covers the requirements for one grade of a synthetic base helicopter transmission system lubricating oil.

FED-STD-103 - Conservation Of Automotive Eneine Oils

JAN-F-461 - Fluid, Shock-Absorber, Heavy (Use Mil-S-46013)

JAN-O-1153 - Oil, Cutting, Mineral-Lard, Sulfur-Treated

JJJ-C-86 - Castor Oil, Technical (S/S By Astm-D960)

JJJ-O-318 - Oil, Castor, Technical-Grade (S/S By Jjj-C-86)

JJJ-W-00145 - Wax, Laundry (S/S By O-W-001359)

MIL-C-1423 - Container, Tin With Graphite Grease, For Range, Field, M-1937

MIL-C-15920 - Coolants, Cutting (Use Mil-C-22572)

MIL-C-18510 - Cutting Compound, Soluble (Paste) (Use Vv-C-846)

MIL-C-22572 - Cutting Fluids, Emulsifiable Oils (S/S By Vv-C-846)

MIL-C-46113 - Cutting-Fluid Concentrates, Transparent

MIL-C-46149 - Cutting Fluid, Sulfur-And-Chlorine-Additive

MIL-C-63277 - Coolant, Guided Boring, Sulfurized Fatty And Mineral Oil

MIL-C-83793 - Calibrating Oil Standards (See Notice 1 For Replacement Information)

MIL-D-46007 - Drawing Compound For Metal Working

MIL-D-83799 - Damping Fluid, Silicone (Specially Blended) (S/S By Vv-D-1078)

MIL-DTL-17111 - Fluid, Power Transmission

This specification covers a class of fluid for use in the hydraulic transmission of power. This fluid is identified by NATO Code No. H-575.

MIL-DTL-23549 - Grease, General Purpose

This specification covers the requirements for one type and grade of a general purpose molybdenum disulfide grease for extended use at temperatures up to 177 Deg. C (350 Deg. F) and for brief periods of use at temperatures up to 204 Deg. C (400 Deg. F) (see 6.1).

MIL-DTL-25681 - Lubricant, Molybdenum Disulfide, Silicone

This specification covers one grade of lubricant for use on sliding surfaces subject to high temperatures in aircraft gas turbine engines. This lubricant is identified by NATO Code Number S-1735 (see 6.3).

MIL-DTL-3918 - Lubricating Oil, Instrument, Jewel Bearing (No S/S Document, See Notice 1 For Additional Information)

This specification covers one grade of low-temperature, non-spreading lubricating oil for use on instrumental jewel bearings.

MIL-DTL-46014 - Lubricating Oil, Spindle

This specification covers spindle oil for machine tool operation.

MIL-DTL-53131 - Lubricating Oil, Precision Rolling Element Bearing, Polyalphaolefin Based

This detail specification covers the requirements for five grades of a synthetic hydrocarbon lubricating oil for use in the precision bearings of internal guidance gyros, accelerometers and other suitable instrument bearing applications.

MIL-DTL-83767 - Lubricating Oil, Vacuum Pump, Mechanical

This specification covers the requirements for four types of lubricating oils for use in mechanical vacuum pumps (see 6.1).

MIL-DTL-85694 - Spectrometric Oil Standards

This specification covers the requirements for blended spectrometric oil standards for use in calibrating or verifying the calibration of spectrometers used in spectrometric analysis of metallic elements found in oils and other fluids.

MIL-F-16929 - Fluid, Damping, Ester Base (Use Vv-D-1078)

MIL-F-2111 - Fluid, Hydraulic Brake (S/S By Vv-F-451)

MIL-F-46148 - Fatty Oil, (For Metal Working Lubricants) (S/S By A-A-59197)

MIL-F-47174 - Fluid, Hydraulic, Petroleum Base Intermediate Viscosity

This specification covers the general requirements for a petroleum base hydraulic fluid for use in the Missile System deployed in areas having temperature range from minus 17.8 degrees C to 37.8 degrees C (0 degree F to 100 degrees F).

MIL-F-5562 - Fluid, Bubble Sextant (Use Vv-D-1078)

MIL-G-007118 - Grease, Aircraft And Instrument, Gear And Actuator Screw(Use Mil-Prf-23827)

MIL-G-14441 - Grease, Railway Brake Cylinder

MIL-G-15793 - Grease, Instrument (Use Mil-G-23827)

MIL-G-16908 - Grease, Bearing (For General Ordnance Use) Use Mil-G-7711

MIL-G-17740 - Grease, Extreme Pressure (S/S By Mil-G-23549)

MIL-G-17745 - Graphite, Colloidal (In Polyalkylene Glycol)

MIL-G-17857 - Grease, Plug Type Scupper Valves (Use Mil-G-6032)

MIL-G-18709 - Grease, Ball And Roller Bearing (S/S By Dod-G-24508)

MIL-G-20303 - Grease, Shell (Use Mil-S-8660)

MIL-G-2108 - Grease, General Purpose, No. 2 (S/S By Mil-G-10924)

MIL-G-21164 - Grease, Molybdenum Disulfide, For Low And High Temperatures, Nato Code Number G-353

This specification covers the requirements for one grade of low and high temperature molybdenum disulfide grease for use as a lubricant on heavily loaded sliding steel surfaces. This grease is identified by NATO Symbol G-353 Military Symbol GMD.

MIL-G-22615 - Grease, Lubricating, For Low And High Temperatures (Use Mil-G-25013)

MIL-G-23515 - Grease, Chassis Lubricant, Automotive (With Molybdenum Disulfide)

MIL-G-25013 - Grease, Aircraft, Ball And Roller Bearing, Nato Code Number G-372, Metric

This specification covers the requirements for one grade of grease for use in anti-friction bearings where operation of low torque equipment will require lubrication for extended periods at temperatures as low as -73 Degrees C and as high as 232 Degrees C. This grease is identified by NATO symbol G-372 (see 6.5).

MIL-G-25537 - Grease, Aircraft, Helicopter Oscillating Bearing, Nato Code Number G-366, Metric

This specification covers the requirements for one grade of grease for use in aircraft bearings having oscillatory motion of small amplitude. This grease is identified by NATO symbol G-366 (see 6.5).

MIL-G-25760 - Grease, Aircraft, Ball And Roller Bearing, Wide Temperature Range (Asg) (S/S By Mil-G-81322)

MIL-G-26548 - Graphite, Colloidal, Lubricant, Pressure Spray Applied (Use Mil-L-23398)

MIL-G-27343 - Grease, Ball And Roller Bearing, For Temperatures From -100 Degrees F To Plus 400 Degrees F (Use Mil-G-25013)

MIL-G-27549 - Grease, Aircraft, Heavy Load Carrying

MIL-G-3278 - Grease, Aircraft And Instrument (For Low And High Temperatures) (Use Mil-G-23827)

MIL-G-3545 - Grease, Aircraft, High Temperature (Use Mil-G-81322)

MIL-G-38220 - Grease, Aircraft, High Speed, Ball And Roller Bearing (S/S By Mil-G-27617 Now Mil-Prf-27617)

MIL-G-38277 - Grease, Aircraft, High Speed, Ball And Roller Bearing, 600 Degrees Fahrenheit

MIL-G-4343 - Grease, Pneumatic System (S/S By Sae-Ams-G-4343)

MIL-G-46003 - Grease, Rifle

MIL-G-46006 - Grease, Aircraft

MIL-G-46012 - Grease, Railroad Journal, Roller Bearing

MIL-G-46178 - Grease, Helicopter, Drive Shaft Coupling

MIL-G-46886 - Grease, Silicone (S/S By A-A-59173)

MIL-G-6032 - Grease, Plug Valve, Gasoline And Oil Resistant, Nato Code Number G-363, Metric (S/S By Sae-Ams-G-6032)

MIL-G-7187 - Grease; Graphite, Aircraft Lubricating (S/S By Mil-G-21164 And Mil-G-23549)

MIL-G-81827 - Grease, Aircraft, High Load Capacity, Wide Temperature Range

This specification covers the requirements for one grade of grease for use as a lubricant on heavily loaded sliding steel surfaces.

MIL-G-81937 - Grease, Instrument, Ultra-Clean, Metric

This specification covers the requirements for one grade of an ultra-clean instrument grease with characteristics which permit its use from -54 deg. C to 121 deg. C.

MIL-G-83414 - Grease, Gunmount, Aircraft

This specification covers one type of grease for heavily loaded sliding applications.

MIL-H-13866 - Hydraulic Fluid, Petroleum Base, Artillery Recoil (Use Mil-H-13919)

MIL-H-13910 - Hydraulic Fluid, Polar Type Automotive Brake (S/S By Mil-B-46176)

MIL-H-13919 - Hydraulic Fluid, Petroleum Base, Fire Control (Use Mil-H-46170)

MIL-H-19457 - Hydraulic Fluid, Fire-Resistant, Non-Neurotoxic

This specification covers the requirements of fire-resistant hydraulic fluid for hydraulic systems which are accumulator loaded and operate above 600 pounds per square inch gauge.

MIL-H-22072 - Hydraulic Fluid, Catapult, Nato Code Number H-579

This specification establishes the requirements for a fire resistant water base fluid for use in catapults. This fluid is identified by NATO symbol H-579.

MIL-H-24430 - Hydraulic Oil, Noncorrosive Sea Water Emulsifying (S/S By Mil-L-17672 Now Mil-Prf-17672)

MIL-H-24459 - Hydraulic Fluid, Antiwear, Petroleum Base (S/S By Mil-L-17672 Now Mil-Prf-17672)

MIL-H-46001 - Hydraulic Fluids, Petroleum Base, For Machine Tools (S/S By A-A-59354)

MIL-H-46004 - Hydraulic Fluid, Petroleum Base, Missile (S/S By Mil-H-5606 Now Mil-Prf-5606)

MIL-H-53119 - Hydraulic Fluid, Nonflammable, Chlorotrifluoroethylene Base

This specification describes the characteristics of and provides the requirements for a chlorotrifluoroethylene base hydraulic fluid for use in hydraulic systems of selected armored vehicles through the temperature range -54 to +135 * C (see 6.1). This fluid is identified by the military symbol NFH.

MIL-H-5559 - Hydraulic Fluid, Arresting Gear (S/S By A-A-59290)

This specification covers the requirements for one type and grade of hydraulic fluid containing two corrosion inhibitors, triethanolamine phosphate and sodium mercaptobenzothiazole.

MIL-H-7644 - Hydraulic Fluid, (Castor Oil Base)

MIL-H-81019 - Hydraulic Fluid, Petroleum Base, Ultra-Low Temperature, Metric

This specification covers the requirements for a petroleum base hydraulic fluid for use in aircraft, missile and ordnance hydraulic systems in the -70 deg. to +100 deg. C temperature range.

MIL-H-83306 - Hydraulic Fluid, Fire Resistant, Phosphate Ester Base, Aircraft (See Notice 1 For Replacement Information)

MIL-HDBK-113 - Guide For The Selection Of Lubricants, Functional Fluids, Preservatives And Speciality Products For Use In Ground Equipment Systems

This handbook establishes design guides for selection of suitable lubricants, power transmission fluids, and corrosion preventatives for use in ground equipment systems, which conform to approved specifications, as required by Mil-STD-838. It includes descriptive material relative to applications, limitations, and federal stock classification, where applicable, and material statements considered to be beneficial to field personnel.

MIL-HDBK-118 - Design Guide For Military Applications Of Hydraulic Fluids

The development of the present level of technology has depended on the evolution of methods for the generation, distribution, and use of power.

MIL-HDBK-267 - Guide For Selection Of Lubricants And Hydraulic Fluids For Use In Shipboard Equipment

This handbook establishes design guides for selection of lubricant fluids and compounds which conform to approved specifications and includes descriptive information relative to shipboard equipment applications, and limitations of the lubricants.

MIL-L-0083176 - Lubricant, Instrument Bearing, Petroleum Base

MIL-L-10295 - Lubricating Oil, Internal Combustion Engine, Sub Zero (Use Mil-L-46167)

MIL-L-10324 - Lubricating Oil, Gear, Sub-Zero (S/S By Mil-Prf-2105)

MIL-L-11734 - Lubricating Oil, Synthetic (For Mechanical Time Fuzes)

This specification covers a synthetic lubricating oil intended for use in mechanical time fuzes at ambient temperatures from -65 deg. to +125 deg. F (-54 deg. to +52 deg. C).

MIL-L-13914 - Lubricating Oil, Gear, Locomotive Traction Motor

MIL-L-15016 - Lubricating Oil, General Purpose (Use Mil-L-17672 And Mil-L-17331)

MIL-L-15017 - Lubricating Oil, Hydraulic (Use Mil-L-17672)

MIL-L-15018 - Lubricating Oil, Mineral, Cylinder (Use Vv-L-1071)

MIL-L-15019 - Lubricating Oil, Compounded (S/S By Agma-250.04)

MIL-L-15719 - Lubricating Grease (High-Temperature, Electric Motor, Ball And Roller Bearings)

This specification covers high temperature grease (type HTG) for the lubrication of ball and roller bearings only, primarily for lubricating class H insulated (silicone) electric motors with heat-stabilized ball bearings.

MIL-L-16348 - Lubricants, Diesel, Heavy Duty Navy 9000 Series, Testing Of

MIL-L-16785 - Lubricating Oil, Breech Block (For Naval Ordinance) (S/S By A-A-59137)

MIL-L-16958 - Lubricating Oil, Mineral Oil Composition, For Torpedo Gyroscope

MIL-L-17353 - Lubricating-Oil, Low Temperature, Special (Use Mil-L-19701)

MIL-L-17554 - Lubricating Grease, Semi-Fluid (For Ordinance Use) No S/S Document)

MIL-L-17778 - Lubricating Oil, Internal Combustion Engine, Diesel, Heavy Duty (Use Mil-L-9000)

MIL-L-17819 - Lubricating Oil, Mineral, Light-Colored, Cordage

MIL-L-18486 - Lubricating Oil, Worm Gear (Use Mil-L-2105)

MIL-L-19224 - Lubricating Oil, Mineral, Preservative, Minus 30 Degrees F Pour (Grade A Use Mil-L-17672, Grade B Use Mil-L-17672, Grade C Use Mil-L-22851)

MIL-L-19701 - Lubricant, All-Weather, Semi-Fluid, For Aircraft Ordnance, Metric

This specification covers the requirements for a semi-fluid lubricant intended for the lubrication of aircraft machine guns and accessory equipment between -55 Deg. C and 70 Deg. C and under cold-sweat-cold cycling conditions.

MIL-L-22273 - Lubricant, Solid Film, Dry (S/S By Mil-L-8937)

MIL-L-22396 - Lubricating Oil, Reciprocating Compressor (S/S By Mil-L-26087)

MIL-L-22803 - Lubricant, Wire Rope

MIL-L-22851 - Lubricating Oil, Aircraft Piston Engine (Ashless Dispersant) (S/S By Sae-J1899)

MIL-L-23398 - Lubricant, Solid Film, Air-Cured, Corrosion Inhibiting, Nato Code Number S-749

This specification establishes the requirements for two types of air-cured solid film lubricant (identified by NATO code number S-749) intended to reduce wear and prevent seizing, corrosion and galling, the lubricant can be applied by dipping, brushing or spraying.

MIL-L-24131 - Lubricant, Colloidal Graphite In Isopropanol

This specification covers a noncorrosive, dry, adherent lubricant consisting of a colloidal dispersion of graphite in isopropanol, intended for use with metal parts having limited clearance in applications where control of impurities is required.

MIL-L-24435 - Lubricating Oil, Marine Two Stroke Cycle Gasoline Engine

MIL-L-24467 - Lubricating Oil, Steam Turbine, Vapor-Space Inhibited (S/S By Mil-17331 Now Mil-Prf-17331)

MIL-L-24478 - Lubricant, Molybdenum Disulfide In Isopropanol

This specification covers requirements for a lubricant consisting of molybdenum disulfide and isopropanol, intended for use with metal parts having limited clearances and in applications where control of impurities is required.

MIL-L-24479 - Lubricant, Red Lead And Graphite In Mineral Oil (For Future Acquisition Of A Product With Similar Functional Performance Refer To A-A-59004)

MIL-L-24484 - Lubricating Oil, Shipboard Reciprocating Air Compressor (S/S By Mil-L-17331 Now Mil-Prf-17331)

MIL-L-25336 - Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, High Film Strength

MIL-L-25504 - Lubricant, Solid Film

MIL-L-27502 - Lubricating Oil, Aircraft Turbine Engine, Ester Base

This specification covers the requirements for one grade of aircraft gas turbine engine lubricating oil.

MIL-L-27694 - Lubricating Oil, Instrument, -65 Degrees To +400 Degrees F

This specification covers one grade of aircraft instrument oil for use in the temperature range of -65 degrees to +400 degrees F.

MIL-L-3503 - Lubricating Oil, Preservative, Light (Use Vv-L-800)

MIL-L-45199 - Lubricating Oil, Internal Combustion Engine, (High Output Diesel) (S/S By Mil-L-2104 Now Mil-Prf-2104)

MIL-L-45983 - Lubricant, Solid Film, Heat Cured (Temperature Range 125 Degrees To 250 Degrees) 51.8 Degrees To 121 Degrees Celsius, Corrosion Inhibiting

This specification covers one grade of solid film lubricant which provides both lubrication and corrosion protection when applied to phosphated ferrous metals and anodized alloys (see 6.1 and 6.4).

MIL-L-46000 - Lubricant, Semi-Fluid (Automatic Weapons)

This specification covers a semi-fluid lubricant for automatic weapons operating within a temperature range of -54 degrees to +127 degrees C (-65 degrees to +260 F degrees ), (See 6.1) The lubricant is identified by Military Symbol LSA and NATO Code Number 0-158 (6.7).

MIL-L-46009 - Lubricant, Solid Film, Air Drying (In Pressurized Containers) (S/S By Mil-L-23398)

MIL-L-46011 - Lubricant, Eumlsifiable Paste For Nosing And Broaching Artillery Shells

MIL-L-46017 - Lubricating Oil, Machine Tool Slideways (S/S By A-A-59113)

MIL-L-46150 - Lubricant, Weapons, Semi-Fluids (High Load-Carrying Capacity)

This specification covers one grade of semi-fluid lubricant which provides a low coefficient of friction and high load-carrying capacity (see 6.1).

MIL-L-46152 - Lubricating Oil, Internal Combustion Engine, Administrative Service (S/S By A-A-52039)

MIL-L-47022 - Lubricating Compound, Fluorosilicone

MIL-L-47081 - Lubricant, Solid Film, Phosphoric Acid Bonded

MIL-L-60326 - Lubricant, Fluorocarbon Telomer Dispersion (For Use With Ammunition)

MIL-L-6082 - Lubricating Oil, Aircraft Piston Engine (Non-Dispersant Mineral Oil) (S/S By Sae-J1966)

This specification establishes the requirements for non-dispersant, mineral lubricating oils to be used in four stroke cycle, reciprocating piston aircraft engines.

MIL-L-6387 - Lubricating Oil, Synthetic Base

MIL-L-644 - Lubricating Oil, General Purpose, Preservative, (Water-Displacing, Low Temperature) (S/S By Fed Spec Vv-L-800)

MIL-L-7645 - Lubricating Grease, Lead Soap And Mineral Oil Base (Use Mil-G-81322)

MIL-L-83176 - Lubricant, Instrument Bearing, Petroleum Base

This specification covers the requirements for specially refined paraffinic petroleum base lubricant.

MIL-L-8383 - Lubricating Oil, Internal Combustion Engine

MIL-L-87132 - Lubricant, Cetyl Alcohol, 1-Hexadecanol, Application To Fasteners (See Notice 2 For Replacement Information)

This specification establishes the requirements for flake or granular cetyl alcohol, the solvent for dissolving the cetyl alcohol, preparation and application requirements for use of cetyl alcohol as an installation lubricant on mechanical fasteners-such as pins, bolts, nuts, washers, and threaded or nonthreaded fastening devices-and inspection criteria for coated parts.

MIL-L-87177 - Lubricants, Water Displacing, Synthetic

This specification covers synthetic, water displacing lubricant, compounds which may be applied from gas pressurized containers, or by dipping or brushing.

MIL-L-8937 - Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Nato Code Number S-1738 (S/S By Mil-L-46010)

MIL-L-9236 - Lubricating Oil, Aircraft Turbine Engine, 400 Degrees F (S/S By Mil-L-27502)

This specification covers one grade of aircraft gas turbine lubricating oil.

MIL-L-9833 - Lubricating Oil, Aircraft Reciprocating Engine, Re-Refining Process For

MIL-O-16427 - Oil, Cutting, Base Sulphurized Lard Oil (Use Mil-C-46149)

MIL-O-19838 - Oil Systems: Aircraft, Installation And Test Of

This specification covers the general requirements for design, functional operation, installation, and testing of oil systems for piloted aircraft, target drones and guided missiles, and shall be followed except as otherwise authorized by the Bureau of Aeronautics for each design.

MIL-O-46016 - Oil, Quenching

MIL-P-17269 - Procedure For The Evaluation Of Diesel Engine Lubricating Oils Under Severe Operating Conditions

MIL-P-17270 - Procedure For The Evaluation Of Diesel Engine Lubricating Oils For Use Under Low Ambient Temperature Conditions

MIL-P-46046 - Preservative Fluid, Automotive Brake System And Components (S/S By Mil-B-46176 Now Mil-Prf-46176)

MIL-P-6851 - Packer, Aircraft Wheel Bearing Grease

MIL-PRF-10924 - Grease, Automotive And Artillery

This specification covers one grade of a multi-purpose grease for lubrication of ground vehicles and equipment (see 6.1) and is identified by Military Symbol GAA and NATO Code Number G-403.

MIL-PRF-12070 - Fog Oil

This performance specification covers the requirements for one grade and type of fog oil (see 6.1) with Military Symbol SGF-2 and NATO Code F-62.

MIL-PRF-14107 - Lubricating Oil, Weapons, Low Temperature

This specification covers a preservative lubricating oil for aircraft and ground small arms weapons at emperatures between 0 deg. to -70 deg. F (-17.8 deg. to -56.6 deg. C). This lubricating oil is identified by Military symbol LAW and North Atlantic Treaty Organization (NATO) Code Number 0-157.

MIL-PRF-17331 - Lubricating Oil, Steam Turbine And Gear, Moderate Service

This specification covers a single classification of steam turbine and gear lubricating oil, moderate service, for use in main and auxiliary turbines and gears, air compressors, and certain hydraulic equipment, as well as for general mechanical lubrication.

MIL-PRF-17672 - Hydraulic Fluid, Petroleum, Inhibited

This specification covers petroleum base hydraulic fluids for use in hydraulic systems and in other applications where a high grade hydraulic fluid having anti-corrosion and anti-oxidation properties are required. This hydraulic fluid is not an extreme pressure (EP) or anti-wear (AW) fluid. This hydraulic fluid should not be used in systems where a fire-resistant fluid is required.

MIL-PRF-18458 - Grease, Wire Rope - Exposed Gear

This specification covers corrosion resistant externally applied grease for use on wire ropes and exposed gears of hoists, winches, cranes, shovels, dredges, and other similar equipment.

MIL-PRF-2104 - Lubricating Oil, Internal Combustion Engine, Combat/Tactical Service

This performance specification covers lubricating oils suitable for lubrication of all reciprocating compression-ignition internal combustion engines (with the exception that the 10W grade should not be used in high output 2-cycle engines) and for power transmission fluid applications in combat/tactical service equipment (see 6.1).

MIL-PRF-2105 - Lubricating Oil, Gear, Multipurpose (Metric) (S/S By Sae-J2360)

This performance specification covers multipurpose gear-lubricating oils (see 6.1).

MIL-PRF-21260 - Lubricating Oil, Internal Combustion Engine, Preservative Break-In

This performance specification covers engine oils suitable for preservation, break-in, and lubrication of reciprocating internal combustion engines of both spark-ignition and compression-ignition types, and of power transmission fluid applications in equipment used in combat/tactical service (see 6.1, 6.7 and 6.9).

MIL-PRF-23699 - Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, Nato Code Numbers: O-152, O-154, O-156, And O-167

This specification covers four classes of gas turbine engine lubricating oils, primarily used for aircraft engines, which have a nominal viscosity of 5 centistokes at 100 ┬░C and which are typically made with neopentyl polyol ester base stocks. This oil is identified by NATO Code Numbers O-152, O-154, O-156, and O-167.

MIL-PRF-23827 - Grease, Aircraft And Instrument, Gear And Actuator Screw

This specification covers the requirements for one grade of grease for use at extremely low temperatures on aircraft and instruments. This grease is effective in the temperature range from -73 degrees to 121 degrees C. The type I grease is identified by NATO code Number G-354 (see 6.8).

MIL-PRF-24139 - Grease, Multipurpose, Water Resistant

This specification covers one grade of grease for multipurpose usade in applications requiring water resistance. It is to be used at temperatures ranging from 0 degrees Fahrenheit (*F) to 230 Deg. F (110 degrees Celsuis (*C)) in all shipboard applications requiring dispensing through long lengths of tubing. Temperature range for use in ball and roller bearing applications is minus 20 to 250 Deg. F.

MIL-PRF-26087 - Lubricating Oil, Reciprocating Compressor, Ground Support

This specification covers lubricating oil for use in power driven, high pressure, reciprocating air compressors used for ground support (see 6.1).

MIL-PRF-27601 - Hydraulic Fluid, Fire Resistant, Hydrogenated Polyalphaolefin Base, High Temperature, Flight Vehicle, Metric

This specification covers the general requirement for a synthetic hydrocarbon base hydraulic fluid for use from -40 Deg. C to 290 Deg. C.

MIL-PRF-27617 - Grease, Aircraft And Instrument, Fuel And Oxidizer Resistant

This specification covers the requirements for greases resistant to hydrocarbon fuel and liquid oxygen and for use as lubricants in aircraft, aerospace vehicles, and supporting equipment (see 6.1).

MIL-PRF-3150 - Lubricating Oil, Preservative, Medium

This specification covers one grade of preservative lubricating oil.

MIL-PRF-3572 - Lubricant, Colloidal Graphite In Oil

This specification covers colloidal graphite in oil lubricant primarily for ordnance but may be used for other purposes (see 6.1).

MIL-PRF-46002 - Preservative Oil, Contact And Volatile Corrosion-Inhibited

This specification covers two grades of water-displacing, contact and volatile, corrosion-inhibited preservative oil, known hereinafter as "oil", for use in the preservation of material in enclosed systems.

MIL-PRF-46010 - Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting Nato Code - S-1738

This specification establishes the requirements for a corrosion inhibiting heat cured solid film lubricant that is intended to reduce wear and prevent galling, corrosion, and seizure of metals (see 6.1). For aerospace component applications see 6.10 Notes.

MIL-PRF-46147 - Lubricant, Solid Film, Air Cured, Corrosion Inhibiting

This specification covers two types of corrosion inhibiting, air cured, solid film lubricants, hereafter known as "lubricants," which provide both lubrication and corrosion protection (see 6.1).

MIL-PRF-46167 - Lubricating Oil, Internal Combustion Engine, Arctic

This performance specification covers one grade of internal combustion compression-ignition engine lubricating oil with military symbol OEA-30 and NATO Code O-183, suitable for arctic use (see 6.1, 6.7 and 6.10).

MIL-PRF-46170 - Hydraulic Fluid, Rust Inhibited, Fire Resistant, Synthetic Hydrocarbon Base, Nato Code No. H-544

This specification covers the requirements for one type of synthetic hydrocarbon base hydraulic fluid (see 6.1) for use in the -40 degrees C to 200 degrees C temperature range in recoil mechanisms and ground vehicle and equipment hydraulic systems. This hydraulic fluid will not be used for aircraft systems, aircraft ground support equipment, or the preservation of aircraft components.

MIL-PRF-46176 - Brake Fluid, Silicone, Automotive, All-Weather, Operational And Preservative

This specification covers silicone-based hydraulic brake fluid for use in hydraulic brake systems at ambient temperatures ranging from +55??C to -55 Degrees C. The fluid is identified by military symbol BFS and NATO code No. H-547.

MIL-PRF-53074 - Lubricating Oil, Steam-Cylinder, Mineral

This performance specification covers mineral oils intended for the lubrication of saturated and superheated systems and uniflow steam engine cylinders (see 6.1).

MIL-PRF-5606 - Hydraulic Fluid, Petroleum Base; Aircraft, Missile, And Ordnance

This specification describes the characteristics and provides the requirements for a petroleum base hydraulic fluid for use in the -54 Deg. C to +135 Deg. C temperature range (see 6.1). This fluid is identified by military symbol OHA and NATO Code No. H-515 (see 6.5).

MIL-PRF-6081 - Lubricating Oil, Jet Engine

This specification covers the requirements for two grades of jet engine lubricating oil.

MIL-PRF-6083 - Hydraulic Fluid, Petroleum Base, For Preservation And Operation

This specification describes the characteristics and provides the requirements for one grade of petroleum base hydraulic fluid for use in the -54??C to +135??C temperature range (see 6.1). This fluid is rust inhibited and used both as a preservative for hydraulic systems and components as well as being an operational fluid. This hydraulic fluid will not be used for aircraft systems, aircraft ground support equipment, or the preservation of aircraft components. The hydraulic fluid is identified by Military Symbol OHT and NATO Symbol C-635.

MIL-PRF-6085 - Lubricating Oil Instrument, Aircraft, Low Volatility

This specification covers one grade of aircraft instrument lubricating oil only (see 6.1). The lubricating oil is identified by military symbol OAI and NATO Code No. 0-147 (see 6.5).

MIL-PRF-6086 - Lubricating Oil, Gear, Petroleum Base (Nato O-153, O-155)

This specification covers two grades of petroleum-based lubricating oils for gears (see 6.1). This oil is identified by NATO Code Numbers O-153 and O-155 (see 1.2).

MIL-PRF-63460 - Lubricant, Cleaner And Preservative For Weapons And Weapons Systems

This specification describes the performance requirements and verification methods for a type of LUBRICANT, CLEANER AND PRESERVATIVE FOR WEAPONS AND WEAPONS SYSTEMS. This product is for use in cleaning, lubricating and short-term (see 6.9.5) preservation of small and large caliber military weapons, operating in the temperature range of -51 to +71 degrees C (-60 to +160 degrees F).

MIL-PRF-81322 - Grease, Aircraft, General Purpose, Wide Temperature Range, Nato Code G-395

This specification covers one grade of general purpose, aircraft grease, NATO Code G-395, formulated to withstand operations at high speeds and a wide temperature range of -54 to 177 Deg. C (-65 to 350 Deg. F).

MIL-PRF-81329 - Lubricant, Solid Film, Extreme Environment, Nato Code Number S-1737

This specification covers the requirements for one grade of a solid film lubricant for use at temperatures ranging from -185 to 400 ??C. This solid film lubricant is identified by NATO symbol S-1737.

MIL-PRF-83261 - Grease, Aircraft, Extreme Pressure, Anti-Wear

This specification covers a grease intended to lubricate aircraft accessories which operate at high speeds and under heavy loads in a temperature range of -73 Degrees C to +232 Degrees C.

MIL-PRF-83282 - Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Metric, Nato Code Number H-537

This specification covers the requirements for a synthetic hydrocarbon-base hydraulic fluid for use in the temperature range of -40?? to +205??C. This hydraulic fluid is identified by NATO Code Number H-537.

MIL-PRF-83363 - Grease, Transmission, Helicopter (Nato G-396)

This specification covers one type of extreme pressure, antiwear helicopter transmission grease. This grease is identified by NATO Code Number G-396 (see 6.3).

MIL-PRF-85336 - Lubricant, All-Weather, (Automatic Weapons)

This specification covers an all-weather semi-fluid, rotary gun lubricant, resistant to corrosive marine and low temperature environments.

MIL-PRF-87100 - Lubricating Oil, Aircraft Turbine Engine, Polyphenyl Ether Base

This specification covers the requirements for one grade of aircraft turbine engine lubricating oil.

MIL-PRF-87257 - Hydraulic Fluid, Fire Resistant; Low Temperature, Synthetic Hydrocarbon Base, Aircraft And Missile

This specification describes the characteristics and provides the requirements for a synthetic hydrocarbon base hydraulic fluid for use in the -54??C to +200??C temperature range in aircraft and missile hydraulic systems. This hydraulic fluid is identified by NATO Code No. H-538 (see 6.5).

MIL-PRF-9000 - Lubrication Oil, Shipboard Internal Combustion Engine, High-Output Diesel

This specification covers two grades (SAE 40 and SAE 15W40) of lubricating oil for use in advanced design high-output shipboard main propulsion and auxiliary diesel engines using fuel conforming to MIL-DTL-16884 and MIL-DTL-5624. Military Symbol 9250, NATO Code 0-278 is the designation used for the SAE 40 Grade product. There is not a Military Symbol or NATO designation for the 15W40 Grade product.

MIL-S-11465 - Soap, Lubricating, 100 Percent Olive Oil Base, Oxygen Compressor

MIL-S-21568 - Silicone Fluid, Dimethyl Polysiloxane (S/S By Vv-D-1078)

MIL-S-27875 - Silicone Fluid, Electronic Coolant

MIL-S-3136 - Standard Test Fluids, Hydrocarbons (S/S By Fed Spec Tt-S-735)

MIL-S-46013 - Silicone Fluid, Shock Absorber, Arctic

MIL-S-81087 - Silicone Fluid, Chlorinated Phenyl Methyl Polysiloxane, Nato Code Number H-536

This specification covers one type of chlorinated phenyl methyl polysiloxane fluid for use over a wide temperature range and having a high thermal stability. This silicone fluid is identified by NATO Code Number H-536.

MIL-STD-1844 - Gas Chromatography Method For Determination Of Trace Chlorinated Solvents In Hydraulic Fluid

MIL-STD-838 - Lubrication Of Military Equipment (S/S By Mil-Hdbk-838)

MIL-T-17128 - Transducer Fluid, Sonar

Sonar transducer fluid covered by this specification is a low percentage volatile, low neutralization number, and high volume resistivity castor oil.

MIL-T-18490 - Transducer, Fluid, Sonar

MIL-T-3123 - Tail-Packing Compound (For Use In Torpedoes)

MIL-T-46008 - Tapering Oil For Metal Working

NFPA-B93.30 - Fluid Power, Hydraulic-Contamination Analysis Data-Reporting Method

This national standard includes methods of reporting data relative to contamination levels of hydraulic fluid used in industrial, mobile and marine applications for the following types of contamination analysis techniques.

QPL-10295-12 - Lubricating Oil, Internal Combustion Engine, Sub-Zero (Mil-L-10295 Was Superseded By Mil-L-46167, Now Mil-Prf-46167)

QPL-10324-12 - Lubricating Oil, Gear, Sub-Zero (See Qpl-2105, Mil-L-10324 S/S By Mil-L-2105)

QPL-10924-37 - Grease, Automotive And Artillery (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-11734-2 - Lubricating Oil, Synthetic (For Mechanical Time Fuzes)

QPL-13866-10 - Hydraulic Fluid, Petroleum Base, Artillery Recoil (S/S By Qpl-13919)

QPL-13910-8 - Hydraulic Fluid, Polar Type, Automotive Brake, All Weather (See Mil-H-46176)

QPL-13919-12 - Hydraulic Fluid, Petroleum Base, Fire Control (See Mil-H-46170)

QPL-14107-29 - Lubricating Oil, Weapons, Low Temperature (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-15016-15 - Lubricating Oil, General Purpose

QPL-15017-41 - Lubricating Oil, Hydraulic

QPL-15018-25 - Lubricating Oil, Mineral, Cylinder

QPL-15019-42 - Lubricating Oil, Compounded

QPL-15719-26 - Lubricating Grease, (High Temperature, Electric Motor, Ball And Roller Bearings) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-15793-8 - Grease, Instrument

QPL-16908-12 - Grease, Bearing (For General Ordnance Use)

QPL-16958-2 - Lubricating Oil, Mineral Oil Composition, For Torpedo Gyroscope

QPL-17111-13 - Fluid, Power Transmission

QPL-17331-107 - Lubricating Oil, Steam Turbine And Gear, Moderate Service (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-17353-1 - Lubricating-Oil, Low Temperature, Special

QPL-17554-2 - Lubricating Grease, Semi-Fluid (For Ordnance Use)

QPL-17672-69 - Hydraulic Fluid, Petroleum, Inhibited (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-17740-3 - Grease, Extreme Pressure

QPL-18458-32 - Grease, Wire Rope-Exposed Gear (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Replacement Information)

QPL-18486-4 - Lubricating Oil, Worm Gear

QPL-18709-58 - Grease, Ball And Roller Bearing (S/S By Dod-G-24508)

QPL-19224-6 - Lubricating Oil, Mineral, Preservative, Minus 30 Degrees F. Pour

QPL-19457-24 - Hydraulic Fluid, Fire Resistant

QPL-19701-8 - Lubricant, All-Weather, Semi-Fluid, For Aircraft Ordnance

QPL-2104-46 - Lubricating Oil, Internal Combustion Engine, Combat/Tactical Service (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-2105-33 - Lubricating Oil, Gear, Multipurpose

QPL-21164-25 - Grease, Molybdenum Disulfide, For Low And High Temperature Nayo Code Number G-353 (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-21260-30 - Lubricating Oil, Internal Combustion Engine, Preservative And Break-In (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-22072-12 - Hydraulic Fluid, Catapult Nato Code Number H-579 (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-22273-4 - Lubricant, Solid Film, Dry

QPL-22396-5 - Lubricating Oil, Reciprocating Compressor

QPL-22851-16 - Lubricating Oil, Aircraft Piston Engine, (Ashless Dispersant)

QPL-23398-16 - Lubricant, Solid Film, Air - Cured, Corrosion Inhibiting, Nato Code Number S-749 (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-23549-15 - Grease, General Purpose (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-23699-19 - Lubricating Oil, Aircraft Turbine Engines, Synthetic Base Nato Code Number 0-156, 0-154 And 0-152 (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-23827-23 - Grease, Aircraft And Instrument, Gear And Actuator Screw (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-24131-11 - Lubricant, Colloidal Graphite In Isopropanol (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-24139-21 - Grease, Multipurpose, Water Resistant (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-24430-2 - Hydraulic Oil, Noncorrosive Sea Water Emulsifying

QPL-24435-2 - Lubricating Oil, Marine Two Stroke Cycle Gasoline Engine

QPL-24459-7 - Hydraulic Fluid, Antiwear, Petroleum Base

QPL-24467-11 - Lubricating Oil, Steam Turbine, Vapor Space Inhibited

QPL-24484-6 - Lubricating Oil, Shipboard Reciprocating Air Compressor

QPL-24508-16 - Grease, High Performance, Multi-Purpose (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-24574-10 - Lubricating Fluid For Low And High Pressure Oxidizing Gas Mixtures (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-25013-27 - Grease, Aircraft, Ball And Roller Bearing, Nato Code Number G-372, Metric (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-25336-2 - Lubricating Oil, Aircraft Turbine Engine, High Film Strength, Synthetic Base

QPL-25504-3 - Lubricant, Solid Film

QPL-25537-19 - Grease, Aircraft, Helicopter Oscillating Bearing, Nato Code Number G-36 6, Metric (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-25760-16 - Grease, Aircraft, Ball And Roller Bearing, Wide Temperature Range

QPL-26087-3 - Lubricating Oil, Reciprocating Compressor, Ground Support

QPL-27343-1 - Grease, Ball And Roller Bearing, For Temperatures Ranging From Minus 100 Deg. F To Plus 400 Deg. F

QPL-27549-1 - Grease, Aircraft, Heavy Load Carrying

QPL-27601-4 - Hydraulic Fluid, Petroleum Base, High Temperature, Flight Vehicle

QPL-27617-8 - Grease, Aircraft, And Instrument, Fuel And Oxidizer Resistant (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-27694-2 - Lubricating Oil, Instrument, Minus 65 Deg To Plus 400 Deg. F

QPL-27875-3 - Silicone Fluid, Electronic Coolant

QPL-3150-34 - Lubricating Oil, Preservative, Medium (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-3278-25 - Grease, Aircraft And Instrument (For Low And High Temperatures)

QPL-3503-21 - Lubricating-Oil, Preservative, Light

QPL-3545-2 - Grease, Aircraft, High Temperature (S/S By Qpl-81322)

QPL-3918-2 - Lubricating Oil, Instrument, Jewel Bearing, Nonspreading, Low Temperature

QPL-4343-21 - Grease, Pneumatic Systems (S/S By Qpl-Ams-G-4343)

QPL-45199-10 - Lubricating Oil, Internal Combustion Engine, High Output Diesel( ) (S/S By Qpl-2104)

QPL-46000-21 - Lubricant, Semi-Fluid (Automatic Weapons) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-46001-7 - Hydraulic Fluid Petroleum Base For Machine Tools

QPL-46002-7 - Lubricating Oil, Contact And Volatile Corrosion Inhibited

QPL-46003-10 - Grease, Rifle

QPL-46004-6 - Hydraulic Fluid, Petroleum Base, Missile (See Notice 1 For Replacement Information)

QPL-46010-18 - Lubricant, Solid Film: Heat Cured, Corrosion Inhibiting (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-46013-1 - Silicon Fluid, Shock Absorber, Arctic

QPL-46147-14 - Lubricant, Solid Film: Air-Cured, Corrosion Inhibiting (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-46150-19 - Lubricant, Weapons, Semi-Fluid (High Load-Carrying Capacity) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-46152-14 - Lubricating Oil, Internal Combustion Engine, Administrative Service

QPL-46167-15 - Lubricating Oil, Internal Combustion Engine, Arctic (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-46170-13 - Hydraulic Fluid, Rust-Inhibited, Fire Resistant, Synthetic Hydrocarbon Base, Nato Code No. H-544 (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-46176-14 - Brake Fluid, Silicone, Automotive, All Weather, Operational And Preservative (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-5606-31 - Hydraulic Fluid, Petroleum Base, Aircraft; Missile And Ordnance (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-6032-18 - Grease, Plug Valve, Gasoline And Oil Resistant, Nato Code Number G-363, Metric (S/S By Qpl-Ams-G-6032)

QPL-6081-30 - Lubricating Oil, Jet Engine (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-6082-23 - Lubricating Oil, Aircraft Piston Engine, (Non-Dispersant Mineral Oil)

QPL-6083-23 - Hydraulic Fluid, Petroleum Base, For Preservation And Operation (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-6085-15 - Lubricating Oil: Instrument, Aircraft, Low Volatility (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-6086-13 - Lubricating Oil, Gear, Petroleum Base (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-63460-32 - Lubricant, Cleaner And Preservative For Weapons And Weapons Systems (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-6387-2 - Lubricating Oil, Synthetic Base

QPL-644-20 - Lubricating Oil, General Purpose, Preservative, (Water Displacing, Low Temperature)

QPL-7083-1 - Hydraulic Fluid, Nonflammable, Aircraft, Hydrolube

QPL-7118-10 - Grease, Aircraft Gear And Actuator Screw For Low And High Temperatures

QPL-7187-7 - Grease, Graphite, Aircraft Lubricating

QPL-7421-7 - Grease, Aircraft And Instrument, Extreme Low Temperature

QPL-7711-20 - Grease, Aircraft, General Purpose

QPL-7808-38 - Lubricating Oil, Aircraft Turbine Engine, Synthetic Base (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-7870-12 - Lubricating Oil: General Purpose, Low Temperature

QPL-81019-8 - Hydraulic Fluid, Petroleum Base, Ultra-Low Temperature

QPL-81087-7 - Silicone Fluid, Chlorinated Phenyl Methyl Polysiloxane Nato Code Number H-536

QPL-81322-19 - Grease, Aircraft, General Purpose, Wide Temperature Range, Nato Code G-395 (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-81827-12 - Grease, Aircraft, High Load Capacity, Wide Temperature Range (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-81846-3 - Lubricating Oil, Instrument, Ball Bearing, High Flash Point

QPL-81937-5 - Grease, Instrument, Ultra-Clean, Metric

QPL-83282-17 - Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Metric Nato Code Number H-537 (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-8383-3 - Lubricating Oil, Internal Combustion Engine

QPL-8446-2 - Hydraulic Fluid, Nonpetroleum Base, Aircraft

QPL-85336-6 - Lubricant, All Weather (Automatic Weapons)

QPL-85733-2 - Grease, High Temperature, Catapult System (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-85734-4 - Lubricating Oil, Helicopter Transmission System, Synthetic Base (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-87100-4 - Lubricating Oil, Aircraft Turbine Engine, Polyphenyl Ether Base (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-87252-2 - Coolant Fluid, Hydrolytically Stable, Dielectric (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-87257-2 - Hydraulic Fluid, Fire Resistant; Low Temperature, Synthetic Hydrocarbon Base, Aircraft And Missile (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-8937-13 - Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting

QPL-9000-102 - Lubricating Oil, Shipboard Internal Combustion Engine, High Output Diesel (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-9236-2 - Lubricating Oil, Aircraft Turbine Engine, 400 Deg. F

QPL-J1899-2 - Lubricating Oil, Aircraft Piston Engine, (Ashless Dispersant) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-J1966-2 - Lubricating Oils, Aircraft Piston Engine (Non-Dispersant Mineral Oil) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-VV-B-680-13 - Brake Fluid, Automotive

QPL-VV-H-910-11 - Hydraulic Fluid, Non&Petroleum Base, Automotive

QPL-VV-L-800-22 - Lubricating Oil, General Purpose, Preservative (Water-Displacing, Low Temperature) (S/S By Qpl-32033)

QPL-VV-L-825-32 - Lubricating Oil, Refrigerant Compressor (Replaced By The Qualified Products Database (Qpd) See Notice 3 For Additional Information)

VV-A-350 - Air Filter Screen Oil (For Use With Automatic Air Filter Screens)

VV-B-136 - Base, Oil, Cutting, Sulfur And Chlorine Containing (S/S By Vv-C-1076)

VV-B-680 - Brake Fluid, Automotive (S/S By Sae-J1703)

VV-C-1076 - Cutting Oil, Sulfur And Chlorine-Containing, Base Oil And Blends

VV-C-846 - Cutting Fluids: Emulsifiable Oils

This specification covers three types of emulsifiable oils, which, when diluted with water, are intended for use in metal-cutting operations (see 6.1).

VV-C-850 - Cutting Fluids, Sulfurized Fatty And Mineral Oils

VV-D-1078 - Damping Fluid, Silicone Base (Dimethyl Polysiloxane)

This specification covers the requirements of dimethyl polysiloxane silicone base damping fluids having viscosities of 0 65 through 2,500,000 centistokes. Damping fluids identified by NATO code numbers are listed in 6.3.

VV-F-451 - Fluid, Hydraulic Brake

VV-G-632 - Grease, Industrial, General Purpose (S/S By Mil-Prf-10924)

This specification covers one grade of a lubricating grease intended primarily for the lubrication of machinery which is equipped with compression type grease cups (see 6.8).

VV-G-671 - Grease, Graphite

This specification covers one grade of a lubricating grease with a moderate load-carrying capacity (see 6.9) and is identified by NATO code number G-412.

VV-G-679 - Grease, Railway (S/S By Mil-G-10924)

VV-H-910 - Hydraulic Fluid, Non-Petroleum Base, Automotive

VV-L-001071 - Lubricating Oil, Steam Cylinder, Mineral (Future Procurement Use Mil-L-53074)

VV-L-1071 - Lubricating Oil, Steam Cylinder, Mineral (Future Procurement Use Mil-L-53074)

VV-L-751 - Lubricating Oil: Chain, Wire-Rope, And Exposed-Gear (S/S By Mil-L-2105 And Mil-G-18458)

VV-L-765 - Lubricant, Enclosed-Gear, Nonextreme-Pressure

This specification covers non-extreme pressure gear lubricants for use where design or operating conditions do not require extreme pressure characteristics.

VV-L-795 - Lubricating Oil, Compounded, Steam-Cylinder

VV-L-800 - Lubricating Oil, General Purpose, Preservative, (Water-Displacing, Low Temperature) (S/S By Mil-Prf-32033)

This specification covers one type and grade of water-displacing, preservative lubricating oil for general purpose applications at low temperatures.

VV-L-820 - Lubricating Oil, General Purpose (Light) (S/S By Vv-L-800)

VV-L-822 - Lubricating Oil, Railway Car And Locomotive

VV-L-825 - ( Images) Lubricating Oil, Refrigerant Compressor, Uninhibited

This specification covers lubricating oils for use in tefrigerant compressors.